Subaru Crosstrek (2019 year). Instruction — part 8

(119,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

neously for more than 5 seconds.

A chirp sound will be heard, and the
function will be disabled.

By operating the driver’s door

1. Sit in the driver’s seat, and close the
door.

2. Push “ ” of the power door locking
switch.
3. Within 5 seconds after step 2 is
performed, open the driver’s door.
4. Within 5 seconds after step 3 is
performed, push “ ” of the power door
locking switch twice while the door is open.
5. Within 10 seconds after step 4 is
performed, close and open the driver’s
door twice.
6. Within 10 seconds after step 5 is

performed, push “ ” of the power door
locking switch twice while the door is open.
7. Within 10 seconds after step 6 is
performed, close and open the driver’s
door once.
8. Within 5 seconds after step 7 is
performed, close the door.

A chirp sound will be heard, and the
functions will be disabled.

NOTE

In steps 4 and 6, press the power door
locking switch slowly. If the switch is
pressed quickly, the functions may not
be disabled.

Enabling functions

When the procedure to disable the func-
tions is performed again, a chirp sound will
be heard, and the functions are enabled.

NOTE

The keyless access function will be

enabled only if you perform the proce-
dure in the same manner you disabled
the function (for example, when dis-
abling by operating the driver’s door,
the function will not be enabled even if
you operate the access key fob).
.

Press the push-button ignition

switch if you do not know the proce-
dure in which the keyless access func-

tion was disabled.

– When disabling by operating the
driver’s door: a chirp will not be
heard
– When disabling by operating the
access key fob: a chirp will be heard

Selecting audible signal op-
eration

Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock. If desired, you may turn
the audible signal off. For more details,
contact a SUBARU dealer.

NOTE

For models with the combination meter
display (color LCD), the setting can be
changed by operating the combination
meter display (color LCD). For details,
refer to “Vehicle Setting” F3-39.

Warning chimes and warning
indicator

The keyless access with push-button start
system sounds a warning chime and
flashes the access key warning indicator
on the combination meter in order to
minimize improper operations and help
protect your vehicle from theft.
For details, refer to “Warning chimes and

– CONTINUED –

Keys and doors/Keyless access with push-button start system

2-13

(120,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

warning indicator of the keyless access
with push-button start system” F3-25.

When access key fob does
not operate properly

Refer to “Access key fob – if access key
fob does not operate properly” F9-17.

Replacing battery of access
key fob

Refer to “Replacing battery of access key
fob” F11-44.

Replacing access key fob

Access key fobs can be replaced at
SUBARU dealers. For more details, con-
tact a SUBARU dealer.

Certification for keyless ac-
cess with push-button start
system

U.S.-spec. models

FCC ID: HYQ14AHK
FCC ID: Y8PFJ16-1
FCC ID: Y8PSSPIMB02

CAUTION

FCC WARNING

Changes or modifications not ex-
pressly approved by the party re-
sponsible for compliance could void
the user’s authority to operate the
equipment.

NOTE

This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This de-
vice may not cause harmful interfer-
ence, and (2) this device must accept
any interference received, including
interference that may cause undesired
operation.

Canada-spec. models

Keys and doors/Keyless access with push-button start system

2-14

(121,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

Mexico-spec. models

IFT
RLVDE1415-1661
14AHK
DENSO

Immobilizer

The immobilizer system is designed to
prevent an unauthorized person from
starting the engine. Only keys registered
with your vehicle’s immobilizer system can
be used to operate your vehicle. If engine
start is attempted with an unregistered
access key fob or key, the engine will not
start. Even if the engine does start, it will
stop after a few seconds. This system,
however, is not a 100% anti-theft guaran-
tee.

CAUTION

Do not place the key under direct

sunlight or anywhere it may be-
come hot.

Do not get the key wet. If the key

gets wet, wipe it dry with a cloth
immediately.

Do not modify or remove the

system. If modified or removed,
the proper operation of the sys-
tem cannot be guaranteed.

NOTE

To protect your vehicle from theft,

please pay close attention to the follow-
ing security precautions:

– Never leave your vehicle unat-
tended with its keys inside.
– Before leaving your vehicle,
close all windows and the moon-
roof, and lock the doors and rear
gate.
– Do not leave spare keys or any
record of your key number in the
vehicle.

The vehicle has a maintenance-free

type immobilizer system.

Security indicator light

Refer to “Security indicator light” F3-29.

Key replacement

Your key number plate will be required if
you ever need a replacement key made.
Any new key must be registered for use
with your vehicle’s immobilizer system
before it can be used. The maximum
number of keys that can be registered for
use with one vehicle is as follows.
.

Four (models without “keyless access

with push-button start system”)
.

Seven (models with “keyless access

– CONTINUED –

Keys and doors/Immobilizer

2-15

(122,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

with push-button start system”)

One key that has already been registered
is required in order to register a new key.

NOTE

If you lose a key, the lost key’s ID code
still remains in the memory of the
vehicle’s immobilizer system. For se-
curity reasons, the lost key’s ID code
should be erased from the memory. To
erase the lost key’s ID code, all keys
that will be used are required.

For details about new key registration
and erasing the lost key’s ID code,
contact your SUBARU dealer.

Certification for immobilizer
system

For models with “keyless access

with push-button start system”:
Refer to “Certification for keyless access
with push-button start system” F2-14.

For models without “keyless access

with push-button start system”:

– U.S.-spec. models

FCC ID: Y8PFJ16-2

CAUTION

FCC WARNING
Changes or modifications not ex-
pressly approved by the party re-
sponsible for compliance could void
the user’s authority to operate the
equipment.

NOTE

– Canada-spec. models

Keys and doors/Immobilizer

2-16

(123,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

– Mexico-spec. models

Remote keyless entry system

CAUTION

Do not expose the remote trans-

mitter to severe shocks, such as
those experienced as a result of
dropping or throwing.

Do not take the remote transmit-

ter apart except when replacing
the battery.

Do not get the remote transmitter

wet. If it gets wet, wipe it dry with
a cloth immediately.

When you carry the remote trans-

mitter on an airplane, do not
press the button of the remote
transmitter while in the airplane.
When any button of the remote
transmitter is pressed, radio
waves are sent and may affect
the operation of the airplane.
When you carry the remote trans-
mitter in a bag on an airplane,
take measures to prevent the
buttons of the remote transmitter
from being pressed.

Access key fob
1)

Lock/arm button

Unlock/disarm button

Rear gate unlock button

PANIC button

– CONTINUED –

Keys and doors/Remote keyless entry system

2-17

(124,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

Transmitter
1)

Lock/arm button

Unlock/disarm button

Rear gate unlock button

PANIC button

The remote keyless entry system has the
following functions.
.

Locking and unlocking the doors (and

rear gate)
.

Unlocking the rear gate

Sounding a panic alarm

Arming and disarming the alarm sys-

tem. For detailed information, refer to
“Alarm system” F2-24.

The operable distance of the remote key-
less entry system is approximately 30 feet
(10 meters). However, this distance will
vary depending on environmental condi-

tions. The system’s operable distance will
be shorter in areas near a facility or
electronic equipment emitting strong radio
waves such as a power plant, broadcast
station, TV tower, or remote controller of
home electronic appliances.

NOTE

For models with “keyless access

with push-button start system”, the
remote keyless entry system will not
be activated when the push-button
ignition switch is in any position other
than the “OFF” position.
.

For models without “keyless access

with push-button start system”, the
remote keyless entry system will not
be activated when the key is inserted in
the ignition switch.
.

The hazard warning flashers will

flash once or twice when the access
key fob/transmitter button is pressed in
the following cases.

– When locking the doors
– When unlocking the doors
– When unlocking the rear gate

Operation of the hazard warning
flashers in the above cases can be set
to “On” or “Off” by a SUBARU dealer.
Consult your SUBARU dealer for de-
tails.

Locking the doors

Press the lock/arm button to lock all doors
and rear gate. An electronic chirp will
sound once and the hazard warning
flashers will flash once.

If any of the doors (or the rear gate) are not
fully closed, the following will occur to alert
you that the doors (or the rear gate) are not
properly closed.
.

an electronic chirp sounds five times.

the hazard warning flashers flash five

times.

When you close the door, it will automati-
cally lock and then the following will occur.
.

an electronic chirp sounds once.

the hazard warning flashers flash once.

Unlocking the doors

Press the unlock/disarm button to unlock
the driver’s door. An electronic chirp will
sound twice and the hazard warning
flashers will flash twice. To unlock all doors
and the rear gate, briefly press the unlock/
disarm button a second time within 5
seconds.

NOTE

If the interval between the first and
second presses of the unlock/disarm
button (for unlocking of all of the doors

Keys and doors/Remote keyless entry system

2-18

(125,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

and the rear gate) is extremely short,
the system may not respond.

Unlocking the rear gate

Press the rear gate unlock button to unlock
the rear gate.
An electronic chirp will sound twice and the
hazard warning flashers will flash twice.

Vehicle finder function

Use this function to find your vehicle
parked among many vehicles in a large
parking lot. Provided you are within 30 feet
(10 meters) of the vehicle, pressing the
lock/arm button three times in a 5-second
period will cause your vehicle’s horn to
sound once and its hazard warning
flashers to flash three times.

NOTE

If the interval between presses is too
short when you press the lock/arm
button three times, the system may
not respond to the signals from the
remote transmitter.

Sounding a panic alarm

To activate the alarm, press the “PANIC”
button once.
The horn will sound and the hazard
warning flashers will flash.
To deactivate the panic alarm, press any
button on the remote transmitter. Unless a
button on the remote transmitter is
pressed, the alarm will be deactivated
after approximately 30 seconds.

Setting audible signal opera-
tion (models without “keyless
access with push-button start
system”)

Using an electronic chirp, the system will
give you an audible signal when the doors
lock and unlock. If desired, you may turn
the audible signal off.

Perform the following steps to deactivate
the audible signal. You can also use the
same steps to restore the function.
1. Sit in the driver’s seat and shut all
doors and the rear gate.

2. Hold down “ ” of the power door
locking switch.
3. While holding down “ ” of the power
door locking switch, pull the key out and re-
insert it into the ignition switch at least 6
times within 10 seconds after Step 2.
4. Open and close the driver’s door once
within 10 seconds after Step 3.
5. The hazard warning flashers flash 3
times to indicate completion of the setting.

Your SUBARU dealer can perform the
above procedure for you. Also, for models
with a combination meter display (color
LCD), the setting can be changed using
the display. For details, refer to “Vehicle
Setting” F3-39.

– CONTINUED –

Keys and doors/Remote keyless entry system

2-19

(126,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

Replacing the battery

Refer to “Replacing key battery” F11-43.

Replacing lost transmitters

If you lose a transmitter or want to
purchase additional transmitters (up to
four can be programmed), your transmit-
ters should be reprogrammed for security
reasons. For details, contact your
SUBARU dealer and have the transmitters
programmed into the remote keyless entry
system.

Certification for remote key-
less entry system

U.S.-spec. models

FCC ID: CWTB1G077
FCC ID: CWTD1G049

CAUTION

FCC WARNING

Changes or modifications not ex-
pressly approved by the party re-
sponsible for compliance could void
the user’s authority to operate the
equipment.

NOTE

Canada-spec. models

Keys and doors/Remote keyless entry system

2-20

(127,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

Mexico-spec. models

IFETEL RLVSUTB15-1814
SUBARU
MODEL: TB1G077

IFETEL RLVSUTD15-1815
SUBARU
MODEL: TD1G049

Door locks

Locking and unlocking from
the outside

NOTE

If you unlock the driver’s door with a
key (including an emergency key) and
open the door while the alarm system is
armed, the alarm system is triggered
and the vehicle’s horn sounds. In this
case, perform any of the following
operations:

Models with “keyless access with

push-button start system”:

– Press any button on the access
key fob (except when the access
key fob battery is discharged).
– Press the push-button ignition
switch to “ACC”.
– Carry the access key fob and
perform either of the following pro-
cedures.

– Grip the front door handle
– Press the rear gate opener
button

Models without “keyless access

with push-button start system”:

– Press any button on the remote
transmitter (except when the trans-
mitter battery is discharged).

– Insert the key into the ignition
switch and turn the ignition switch
to “ON”.

For details about the alarm system,
refer to “Alarm system” F2-24.

How to lock and unlock the vehicle
by using the key

Rotate the key toward the front to lock.

Rotate the key toward the rear to unlock.

In this case, only the driver’s side door is
locked.

NOTE

Models with “keyless access with
push-button start system”:
The emergency key is directional. If the
key cannot be inserted, change the

– CONTINUED –

Keys and doors/Door locks

2-21

(128,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

direction that the grooved side is facing
and insert it again.

How to lock the vehicle without
using the key

To lock the door from outside without the
key, the following methods are available.

Locking using lock lever

Rotate the lock lever forward.

Close the door.

In this way, only the door that was operated
will be locked.

Locking using power door lock-
ing switch

Press the lock side of the power door
locking switch.*

Close the door.

*: For details about the power door locking

switch, refer to “How to operate the power
door locking switches” F2-23.

In this case, all closed doors and the rear
gate are locked at the same time.

NOTE

Make sure that you do not leave the key
inside the vehicle when locking the
doors from the outside without the key.

Locking and unlocking from
the inside

How to use the lock lever

Rotate the lock lever rearward to unlock.

Rotate the lock lever forward to lock.

Always make sure that all doors and the
rear gate are closed before starting to
drive.

The red mark on the lock lever appears
when the door is unlocked.

WARNING

Keep all doors locked when you
drive, especially when small chil-
dren are in your vehicle.

Along with the proper use of seat-

Keys and doors/Door locks

2-22

(129,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

belts and child restraints, locking
the doors reduces the chance of
being thrown out of the vehicle in an
accident.

It also helps prevent passengers
from falling out if a door is acciden-
tally opened, and intruders from
unexpectedly opening doors and
entering your vehicle.

How to operate the power door
locking switches

All doors and the rear gate can be locked
and unlocked using the power door locking
switches located at the driver’s side and
the front passenger’s side doors.

Example
1)

Press to lock

Press to unlock

NOTE

Make sure that you do not leave the key
inside the vehicle before locking the
doors from the outside using the power
door locking switches.

Key lock-in prevention func-
tion

Under the following conditions, all the
doors will not lock when the power door
locking switch is pushed with the driver
door open.
.

The key is still in the ignition switch

(models without “keyless access with

push-button start system”)
.

The ignition switch is in the “ACC” or

“ON” position (models with “keyless ac-
cess with push-button start system”)

NOTE

When leaving the vehicle, make sure

you are holding the key before locking
the doors.
.

The factory setting (default setting)

for this function is set as “operational”.
This function’s operational/non-opera-
tional setting can be changed by a
SUBARU dealer. Contact a SUBARU
dealer for details.

Non-operation of key lock-in pre-
vention function

When the system is set so that it does not
operate, the doors are locked by the
following operation.
.

If the lock lever is turned to the front

(“LOCK”) position with the driver’s door
open and the driver’s door is then closed
with the lock lever in that position, the
driver’s door is locked.
.

If the spare key is used to lock the

driver’s door from the outside of the
vehicle, the door is locked.

– CONTINUED –

Keys and doors/Door locks

2-23

(130,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

Battery drainage prevention
function

If a door or the rear gate is not completely
closed, the interior lights will remain
illuminated as a result. However, several
lights are automatically turned off by the
battery drainage prevention function to
prevent the battery from discharging. The
following interior lights are affected by this
function.

Item

Switch

position

Automatically turning

off

Map lights

DOOR

Approximately 20

minutes later

Dome light

DOOR

Approximately 20

minutes later

Ignition
switch light

—

Approximately 20

minutes later

Cargo area
light

DOOR

Approximately 20

minutes later

NOTE

The default setting for this function

is set as “operational”. The operational/
non-operational setting of this function
can be changed by a SUBARU dealer.
Contact your SUBARU dealer to
change the setting.
.

When leaving the vehicle, please

make sure that all doors and the rear
gate are completely closed.
.

The battery drainage prevention

function does not operate while the
key is in the ignition switch.

Alarm system

The alarm system helps to protect your
vehicle and valuables from theft. The horn
sounds and the hazard warning flashers
flash if someone attempts to break into
your vehicle.

For models with “keyless access with
push-button start system”:
The system can be armed or disarmed
with the keyless access function or access
key fob.
The system will not be activated when the
push-button ignition switch is in the “ACC”
or “ON” position.

For models without “keyless access
with push-button start system”:
The system can be armed or disarmed
with the remote transmitter.
The system will not be activated when the
key is inserted into the ignition switch.

Your vehicle’s alarm system has been set
for activation at the time of shipment from
the factory. You can set the system for
deactivation yourself or have it done by
your SUBARU dealer.

Keys and doors/Alarm system

2-24

(131,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

Alarm system operation

When the alarm system is armed, it is
triggered by opening any of the doors, rear
gate or engine hood.
The alarm system will activate the follow-
ing alarms when triggered.
.

The vehicle’s horn will sound for 30

seconds.
.

The hazard warning flashers will flash

for 30 seconds.

If any of the doors, rear gate or engine
hood remains open after the 30-second
period, the horn will continue to sound for a
maximum of 3 minutes. If the door, rear
gate or engine hood is closed while the
horn is sounding, the horn will stop
sounding with a delay of up to 30 seconds.

NOTE

The alarm system can be set to trigger
the illumination of the following interior
lights.
.

Map lights (illuminates only when

the door interlock switch is in the
“DOOR” position)
.

Dome light (illuminates only when

the dome light switch is in the “DOOR”
position)
.

Cargo area light (illuminates only

when the cargo area light switch is in
the “DOOR” position)

The notifications regarding the map
lights, dome light and cargo area light
are deactivated as the factory setting. A
SUBARU dealer can activate the sys-
tem. Contact your SUBARU dealer for
details.

Arming the system

The alarm system becomes armed when
the following operation is performed.
1. Close all windows and the moonroof (if
equipped) and turn the ignition switch to
the “OFF” position.
2. Carry the key and get out of the
vehicle.
3. Make sure that the engine hood is
closed.
4. Lock the doors using any of the
following methods.

Locking using the remote keyless

entry system. For details, refer to
“Remote keyless entry system” F2-17.
.

Locking using the keyless access

function (if equipped). For details, refer
to “Locking with the door lock sensor”
F2-8.
.

Locking using the power door lock-

ing switch. For details, refer to “Locking
using power door locking switch” F2-
22.

NOTE

Security indicator light

All doors and the rear gate will lock,

an electronic chirp will sound once, the
hazard warning flashers will flash once,
and the security indicator light will start
flashing rapidly.
.

If any of the doors or the rear gate is

not fully closed, an electronic chirp
sounds five times, the hazard warning
flashers flash five times to alert you that
the doors (or the rear gate) are not
properly closed. When you close the
door, doors will automatically lock.

5. Approximately 30 seconds later, the
system will enter surveillance state.

– CONTINUED –

Keys and doors/Alarm system

2-25

(132,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

When the system is in surveillance state,
the security indicator light will then flash
slowly (twice approximately every 2 sec-
onds), indicating that the system has been
armed for surveillance.

NOTE

The system can be armed even if the

windows and/or moonroof are open.
Always make sure that they are fully
closed before arming the system.
.

The 30-second standby time can be

eliminated if you prefer. Have it per-
formed by your SUBARU dealer.
.

If any of the following actions is

done during the standby period, the
system will not switch to the surveil-
lance state.

– Doors (including the rear gate)
are unlocked using the access key
fob/remote transmitter.
– Doors (including the rear gate)
are unlocked using the keyless
access function (models with “key-
less access with push-button start
system”).
– Any door (including the rear gate)
is opened.
– The ignition switch is turned to
the “ON” position (models without
“keyless access with push-button
start system”).

– Push-button ignition switch is
turned to the “ACC” position (mod-
els with “keyless access with push-
button start system”).

Disarming the system

Perform either of the following procedures.
.

Briefly press a button (for less than 2

seconds) on the access key fob/remote
transmitter.
.

Carry the access key fob and perform

either of the following procedures (models
with “keyless access with push-button
start system”).

– Grip the front door handle.
– Press the rear gate opener button.
– Unlock using the PIN code access.

The flashing of the security indicator light
will then change slowly (once approxi-
mately every 3 seconds from twice ap-
proximately every 2 seconds), indicating
that the alarm system has been disarmed.

Emergency disarming

If you cannot disarm the system using the
access key fob/transmitter (i.e. the trans-
mitter is lost, broken or the transmitter
battery is too weak), you can disarm the
system without using the access key fob/
remote transmitter.
The system can be disarmed if you turn the

ignition switch from the “LOCK”/“OFF” to
the “ON” position with a registered key/
access key fob.

NOTE

For models with “keyless access with
push-button start system”, if the ac-
cess key fob battery is discharged,
perform the procedure described in
“Switching power status” F9-18. In
such a case, replace the battery im-
mediately. Refer to “Replacing battery
of access key fob” F11-44.

Alarm system setting

To change the setting of your vehicle’s
alarm system for activation or deactiva-
tion, do the following.
1. Disarm the alarm system. Refer to
“Disarming the system” F2-26.
2. Sit in the driver’s seat and shut all
doors, rear gate and engine hood.
3. Turn the ignition switch to the “ON”
position.
4. Hold down “ ” of the driver’s power
door locking switch, open the driver’s door
within the following 1 second, and wait 10
seconds without releasing the switch. The
setting will then be changed as follows.

Keys and doors/Alarm system

2-26

(133,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

Type A combination meter

Setting

status

Combination

meter display

Horn

Activate

ALon

Once

Deactivate

ALoF

Twice

Type B combination meter

Setting

status

Combination

meter display

Horn

Activate

AL ON

Once

Deactivate

AL OFF

Twice

NOTE

You may have the above setting change
done by your SUBARU dealer.

If you have accidentally trig-
gered the alarm system

To stop the alarm

Do any of the following operations:
.

Press any button on the access key fob/

remote transmitter.
.

Turn the ignition switch to the “ON”

position (models without “keyless access
with push-button start system”).
.

Turn the push-button ignition to the

“ACC” position (models with “keyless
access with push-button start system”).

NOTE

Only registered keys will stop the
alarm. If the immobilizer transponder
is not registered, the alarm will not
stop.

Valet mode

When you choose the valet mode, the
alarm system does not operate. In valet
mode, the remote transmitter is used only
for locking and unlocking the doors and
rear gate and panic activation.

To enter the valet mode, change the
setting of your vehicle’s alarm system for
deactivation mode. Refer to “Alarm system
setting” F2-26. The security indicator light
will continue to flash once every 3 seconds
indicating that the system is in the valet
mode.

To exit valet mode, change the setting of
your vehicle’s alarm system for activation
mode. Refer to “Alarm system setting” F2-
26.

Child safety locks

Each rear door has a child safety lock.
When the child safety lock lever is in the
lock position, the door cannot be opened
from inside. The door can only be opened
from the outside.

WARNING

Always turn the child safety locks to
the “LOCK” position when children
sit in the rear seat. Serious injury
could result if a child accidentally
opens the door and falls out.

Keys and doors/Child safety locks

2-27

(134,1)

北米Model "A1340BE-A" EDITED: 2018/ 4/ 2

Windows

WARNING

To avoid serious personal injury
caused by entrapment, always con-
form to the following instructions
without exception.

When operating the power win-

dows, be extremely careful to
prevent anyone’s fingers, arms,
neck, head or other objects from
being caught in the window.

Always lock the passengers’ win-

dows using the lock switch when
children are riding in the vehicle.

Always carry the key when you

leave the vehicle for safety rea-
sons and never allow an unat-
tended child to remain in the
vehicle. Failure to follow this
procedure could result in injury
to a child operating the power
window.

The power windows operate only when the
ignition switch is in the “ON” position.

Power window operation

Power window switches

Driver’s side power window switches:

For front left window (with one-touch auto
up and down feature)

For front right window (with one-touch
auto up and down feature)

For rear left window

For rear right window

Lock switch

All door windows can be controlled by the
power window switch cluster at the driver
side door.

Passenger ’s side power window

switches:

Each passenger’s window can be con-
trolled by the power window switch located
on the door.

Keys and doors/Windows

2-28

Была ли эта страница вам полезна?

Да!Нет

5 посетителей считают эту страницу полезной.

Subaru Crosstrek (2019 year). Instruction — part 8

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.