Subaru Impreza 3 / Impreza WRX / Impreza WRX STI. Manual — part 683

WW-13

Wiper Blade

WIPER AND WASHER SYSTEMS

E: INSPECTION

1) When the wiper does not operate properly, in-

spect the following item.

• Make sure the movable part of blade assembly

moves smoothly.

• Make sure the wiper rubber is not deformed or

damaged.

2) Replace with a new part if damage is found.

WW-14

Washer Tank and Motor

WIPER AND WASHER SYSTEMS

5. Washer Tank and Motor

A: REMOVAL

1) Open the front hood.

2) Disconnect the ground cable from battery.

3) Remove the front bumper face. <Ref. to EI-31,

FRONT BUMPER FACE, REMOVAL, Front

Bumper.>

4) Remove the duct clip.

5) Disconnect the connector.

6) Remove the screws and detach the cover.

7) Prepare a container before disconnecting the

washer hose and drain all washer fluid in the wash-

er tank.

8) Remove the bolts and nuts and remove the

washer tank.

B: INSTALLATION

Install each part in the reverse order of removal.
Tightening torque:

6.0 N·m (0.61 kgf-m, 4.4 ft-lb)

C: DISASSEMBLY

Pull out the washer motor from the tank.

WW-00480

WW-00481

WW-00482

(A) Front
(B) Rear

WW-00483

WW-00484

(A)

(B)

WW-00485

WW-15

Washer Tank and Motor

WIPER AND WASHER SYSTEMS

D: ASSEMBLY

1) Assemble each part in the reverse order of dis-

assembly.

2) Confirm that water does not leak from installa-

tion area of motor.

E: INSPECTION

Apply battery voltage to the connector terminal of

the washer motor and make sure the motor oper-

ates.

WW-00287

WW-16

Front Wiper Arm

WIPER AND WASHER SYSTEMS

6. Front Wiper Arm

A: REMOVAL

1) Open the front hood.

2) Remove the cap.

3) Remove the nut and remove the arm.

B: INSTALLATION

1) Install each part in the reverse order of removal.

2) Operate the wiper once.

3) Align the wiper blade to ceramic print point mark

(A) of front window panel.

Tightening torque:

Refer to “COMPONENT” of “General Descrip-

tion”. <Ref. to WW-2, FRONT WIPER, COM-

PONENT, General Description.>

C: ADJUSTMENT

Operate the wiper once. Align the wiper blade to

ceramic print point mark (A) of front window panel.

WW-00514

WW-00048

(A)

WW-00048

(A)