Subaru Impreza (2022 year). Manual in english — page 15
(235,1)
&
Outside mirrors
!
Convex mirror (passenger side)
WARNING
Objects look smaller in a convex
mirror and farther away than when
viewed in a flat mirror. Do not use the
convex mirror to judge the distance
of vehicles behind you when chan-
ging lanes. Use the inside mirror (or
glance backwards) to determine the
actual size and distance of objects
that you view in convex mirror.
!
Remote control mirror switch
: Select side to adjust
: Direction control
The remote control mirrors operate only
when the ignition switch is in the “ON” or
“ACC” position.
1. Turn the control switch to the side that
you want to adjust. “L” is for the left mirror,
“R” is for the right mirror.
2. Move the control switch in the direction
you want to move the mirror.
3. Return the control switch to the neutral
position to prevent unintentional opera-
tion.
The mirrors can also be adjusted manu-
ally.
Defogger and deicer (if
equipped)
1)
Rear window defogger
2)
Outside mirror defogger (if equipped)
3)
Windshield wiper deicer (if equipped)
– CONTINUED –
Instruments and controls/Defogger and deicer
3-87
3
(236,1)
The vehicle is equipped with the defogger
and the deicer (if equipped) system. The
defogger and deicer system is activated
only when the ignition switch is in the “ON”
position.
Climate control system type A
1)
Models without outside mirror defogger
2)
Models with outside mirror defogger
Climate control system type B and C
To activate simultaneously the rear win-
dow defogger, outside mirror defogger (if
equipped) and windshield wiper deicer (if
equipped), press the control button that is
located on the climate control panel. The
indicator light on the control button illumi-
nates while the defogger and deicer
system is activated.
To turn them off, press the control button
again. They also turn off when the ignition
switch is turned to the “ACC” or “LOCK”/
“OFF” position.
The defogger and deicer system will
automatically shut off after approximately
15 minutes. If the rear window and the
outside mirrors have been cleared and the
windshield blade rubbers have been
deiced completely before that time, press
the control button to turn them off.
For climate control system (type B and
C),
it is possible for the defogger and
deicer system to be set to continuous
operation mode by a SUBARU dealer.
Consult your SUBARU dealer for details.
Also, for models with a combination meter
display (color LCD), it is possible to set the
defogger and deicer system for the con-
tinuous operation mode. For details, refer
to “Vehicle Setting”
CAUTION
.
To prevent the battery from being
discharged, do not operate the
defogger and deicer system con-
tinuously for any longer than
necessary.
.
Do not use sharp instruments or
window cleaner containing abra-
sives to clean the inner surface of
the rear window. They may da-
mage the conductors printed on
the window.
Instruments and controls/Defogger and deicer
3-88
(237,1)
NOTE
.
Turn on the defogger and deicer
system if the wipers are frozen to the
windshield.
.
If the windshield is covered with
snow, remove the snow so that the
windshield wiper deicer works effec-
tively.
.
While the defogger and deicer sys-
tem is in the continuous operation
mode:
– If the vehicle speed remains at 9
mph (15 km/h) or lower for 15
minutes, the windshield wiper dei-
cer system automatically stops op-
erating. However, the rear window
defogger system and outside mirror
defogger system maintain continu-
ous operation in this condition.
– If the vehicle battery voltage
drops below the permissible level,
continuous operation of the defog-
ger system and deicer system is
canceled and the system stops
operating.
Tilt/telescopic steering wheel
WARNING
.
Do not adjust the steering wheel
tilt/telescopic position while driv-
ing. This may cause loss of
vehicle control and result in per-
sonal injury.
.
If the lever cannot be raised to the
fixed position, adjust the steering
wheel again. It is dangerous to
drive without locking the steering
wheel. This may cause loss of
vehicle control and result in per-
sonal injury.
1)
Tilt adjustment
2)
Telescopic adjustment
3)
Tilt/telescopic lock lever
1. Adjust the seat position. Refer to “Front
seats”
2. Pull the tilt/telescopic lock lever down.
3. Move the steering wheel to the desired
level.
4. Pull the lever up to lock the steering
wheel in place.
5. Make sure that the steering wheel is
securely locked by moving it up and down,
and forward and backward.
– CONTINUED –
Instruments and controls/Tilt/telescopic steering wheel
3-89
3
(238,1)
&
Heated Steering Wheel sys-
tem (if equipped)
The Heated Steering Wheel system
warms the steering wheel at the constant
temperature.
1)
Heated Steering Wheel switch
2)
Indicator light
3)
Heated area
To turn on the Heated Steering Wheel
system, pull the Heated Steering Wheel
switch when the ignition switch is in the
“ON” or “ACC” position. Then the steering
wheel will be warmed and the indicator
light on the switch will illuminate.
To turn off the Heated Steering Wheel
system, pull the switch again. Then the
indicator light will turn off.
CAUTION
.
Use the Heated Steering Wheel
system with the engine running.
Otherwise, the battery voltage
may drop below the permissible
level and it may not be possible to
start the engine.
.
There is a possibility that people
with delicate skin may suffer
slight burns even at low tempera-
tures if they use the Heated
Steering Wheel for a long period
of time. When using the Heated
Steering Wheel, always be sure to
warn the persons concerned.
.
Do not cover the Heated Steering
Wheel with an object such as a
steering wheel cover. Doing so
may cause the Heated Steering
Wheel to overheat.
.
Do not spill liquid on the steering
wheel. If liquid is spilled, wipe it
off immediately and dry it before
using the Heated Steering Wheel
system.
NOTE
.
If the surface temperature of the
steering wheel is approximately above
104
8
F (40
8
C) when the Heated Steering
Wheel system is turned on, the system
will not heat the steering wheel. Then,
the indicator light will continue to
illuminate.
.
The Heated Steering Wheel system
will automatically turn off approxi-
mately 30 minutes after the Heated
Steering Wheel system has been
turned on.
Instruments and controls/Tilt/telescopic steering wheel
3-90
(239,1)
Horn
To sound the horn, push the horn pad.
Instruments and controls/Horn
3-91
3
(241,1)
Ventilator control . . . . . . . . . . . . . 4-2
Center ventilators . . . . . . . . . . . . .. 4-2
Side ventilators. . . . . . . . . . . . . .. 4-2
Climate control panel . . . . . . . . . . . . 4-2
Type A . . . . . . . . . . . . . . . . ... 4-3
Type B . . . . . . . . . . . . . . . . ... 4-4
Type C . . . . . . . . . . . . . . . . ... 4-5
Automatic climate control operation
(type B and C) . . . . . . . . . . . . . .. 4-6
Sensors . . . . . . . . . . . . . . . . . 4-6
Manual climate control operation . . . . . . .. 4-7
Airflow mode selection. . . . . . . . . . ... 4-7
MAX A/C mode (for type B and C) . . . . . . .. 4-8
Temperature control . . . . . . . . . . . ... 4-8
Fan speed control . . . . . . . . . . . . .. 4-9
Air conditioner control . . . . . . . . . . ... 4-9
Air inlet selection . . . . . . . . . . . . ...4-9
To turn off the climate control system. . . . . .4-9
Defrosting. . . . . . . . . . . . . . . .. 4-10
Operating tips for heater and air conditioner . 4-10
Cleaning ventilation grille . . . . . . . . . . 4-10
Efficient cooling after parking in direct sunlight . 4-11
Lubrication oil circulation in the refrigerant
circuit. . . . . . . . . . . . . . . . 4-11
Checking air conditioning system before
summer season . . . . . . . . . . . . . 4-11
Cooling and dehumidifying in high humidity and
low temperature weather conditions. . . . ... 4-11
Air conditioner compressor shut-off when
engine is heavily loaded . . . . . . . . . 4-11
Refrigerant for your climate control system . . .. 4-11
Air filtration system. . . . . . . . . . . ...4-11
Replacing the cabin air filter . . . . . . . . . 4-12
Climate control
4
(242,1)
Ventilator control
&
Center ventilators
Center ventilators
To adjust the airflow direction, move the
tab. To close the ventilator, move the tab all
the way down.
&
Side ventilators
Side ventilators
1)
Close
2)
Open
To adjust the flow direction, move the tab.
Climate control panel
WARNING
.
The cooling function operates
only when the engine is running.
.
Do not leave children or adults
who would normally require the
support of others alone in your
vehicle. Pets should not be left
alone either. On hot, sunny days,
temperatures in a closed vehicle
could quickly become high en-
ough to cause severe or possibly
fatal injuries to people or ani-
mals.
Climate control/Ventilator control
4-2
(243,1)
&
Type A
1)
Airflow mode selection dial (Refer to
“Airflow mode selection”
2)
Fan speed control dial (Refer to “Fan
speed control”
3)
Temperature control dial (Refer to “Tem-
perature control”
4)
Air conditioner button (Refer to “Air
conditioner control”
5)
Air inlet selection button (Refer to “Air
inlet selection”
6)
Rear window defogger button and mirror
heater button (if equipped) (Refer to
“Defogger and deicer”
– CONTINUED –
Climate control/Climate control panel
4-3
4
(244,1)
&
Type B
1)
Temperature control dial (Refer to “Auto-
matic climate control operation (type B
and C)”
4-6 and/or “Temperature con-
2)
AUTO button (Refer to “Automatic cli-
mate control operation (type B and C)”
3)
Air conditioner button (Refer to “Air
conditioner control”
4)
Air inlet selection button (Refer to “Air
inlet selection”
5)
MAX A/C button (Refer to “MAX A/C
mode (for type B and C)”
6)
Defroster button (Refer to “Defrosting”
7)
Rear window defogger button and mirror
heater button (Refer to “Defogger and
deicer”
8)
Airflow mode selection dial (Refer to
“Airflow mode selection”
9)
Fan speed control dial (Refer to “Fan
speed control”
10) ON/OFF button (Refer to “Automatic
climate control operation (type B and
C)”
NOTE
The climate control screen is displayed
on the multi-function display (color
LCD). Refer to “Climate control screen”
Climate control/Climate control panel
4-4
(245,1)
&
Type C
1)
Driver’s side temperature control dial
(Refer to “Automatic climate control
operation (type B and C)”
4-6 and/or
2)
AUTO button (Refer to “Automatic cli-
mate control operation (type B and C)”
3)
Air conditioner button (Refer to “Air
conditioner control”
4)
Air inlet selection button (Refer to “Air
inlet selection”
5)
MAX A/C button (Refer to “MAX A/C
mode (for type B and C)”
6)
Defroster button (Refer to “Defrosting”
7)
Rear window defogger button and mirror
heater button (Refer to “Defogger and
deicer”
8)
Passenger’s side temperature control
dial (Refer to “Temperature control”
9)
SYNC button (Refer to “SYNC mode
(type C)”
10) Fan speed control dial (Refer to “Fan
11) Airflow mode selection button (Refer to
12) ON/OFF button (Refer to “Automatic
climate control operation (type B and
C)”
NOTE
The climate control screen is displayed
on the multi-function display (color
LCD). Refer to “Climate control screen”
Climate control/Climate control panel
4-5
4
(246,1)
Automatic climate control
operation (type B and C)
When this mode is selected, the fan speed,
airflow distribution, air-inlet control, and air
conditioner compressor operation are
automatically controlled. To activate this
mode, perform the following.
1. Press the AUTO button. The indicator
light “FULL AUTO” on the multi-function
display (color LCD) illuminates.
2. Set the preferred temperature using
the temperature control dial.
NOTE
.
Operate the automatic climate con-
trol system when the engine is running.
.
Even when cooling is not necessary,
the air conditioner compressor will
automatically turn on if the temperature
is set much lower than the current
outlet air temperature. Even in this
case, the “A/C” indicator light on the
control panel illuminates.
.
The air conditioner may not operate
in the following cases:
– When the cabin temperature is
low
– When the ambient temperature
decreases close to 32
8
F (0
8
C)
.
The controllable temperature range
may vary depending on the regional
specifications of the vehicle.
.
If you operate any of the buttons on
the control panel other than the ON/
OFF button, rear window defogger
button, SYNC button (if equipped) and
temperature control dial(s) during
FULL AUTO mode operation, the
“FULL” indicator light on the multi-
function display (color LCD) will turn
off and the “AUTO” indicator light will
remain illuminated. You can then manu-
ally control the system as desired using
the button you operated. To change the
system back to the FULL AUTO mode,
press the AUTO button.
To turn off the climate control system,
press the ON/OFF button. Then the air
inlet selection will be set to the following.
.
When the air inlet selection is set to
auto mode: Outside air circulation
.
When the air inlet selection is set to
manual mode: No change
&
Sensors
The sensors are located as follows.
1)
Interior air temperature sensor
2)
Solar sensor
The automatic climate control system
employs several sensors. These sensors
Climate control/Automatic climate control operation (type B and C)
4-6
(247,1)
are delicate. If they are not treated properly
and become damaged, the system may
not be able to control the interior tempera-
ture correctly. To avoid damaging the
sensors, observe the following precau-
tions.
.
Do not subject the sensors to impact.
.
Keep water away from the sensors.
.
Do not cover the sensors.
Manual climate control op-
eration
&
Airflow mode selection
Select the airflow mode by using the
airflow mode selection dial (type A and B)
or the airflow mode selection button (type
C).
Airflow modes are as follows.
Ventilation:
Instrument panel outlets
Ventilation 2 for type B and C:
Instru-
ment panel outlets and foot outlets
Bi-level:
Instrument panel outlets and foot
outlets
– CONTINUED –
Climate control/Manual climate control operation
4-7
4
(248,1)
Heat:
Foot outlets, both side outlets of the
instrument panel and some through wind-
shield defroster outlets (A small amount of
air flows to the windshield and both side
windows to prevent fogging.)
Heat-def:
Windshield defroster outlets,
foot outlets and both side outlets of the
instrument panel (Refer to “Defrosting”
Defrost for type A:
Windshield defroster
outlets and both side outlets of the instru-
ment panel (Refer to “Defrosting”
&
MAX A/C mode (for type B and
C)
For quicker cooling, press the MAX A/C
button.
When the MAX A/C mode is on, the
following settings will be changed auto-
matically.
.
The air conditioner will turn on.
.
The temperature will be set on the
lowest.
.
The fan speed will be set on the
maximum speed.
.
The air inlet will be set to recirculation.
.
The air flow mode setting will be set to
ventilation mode.
To turn off MAX A/C mode and return the
previous setting, press the MAX A/C
button again.
&
Temperature control
Turn the temperature control dial to set the
preferred interior temperature.
NOTE
The controllable temperature range
may vary depending on the regional
specifications of the vehicle.
!
SYNC mode (type C)
When the SYNC mode is turned on, both
the driver’s and passenger’s side tem-
peratures are synchronized using the
driver’s side temperature control dial.
Press the SYNC button to turn on the
SYNC mode. The SYNC button indicator
will illuminate.
Press the SYNC button again or turn the
passenger’s side temperature control dial
to cancel the SYNC mode. The SYNC
button indicator will not illuminate. In this
case, temperature control on the driver’s
Climate control/Manual climate control operation
4-8
(249,1)
side and passenger’s side is separate.
The temperature will be controlled indivi-
dually using the driver’s and passenger’s
temperature control dials.
&
Fan speed control
Select the preferred fan speed by turning
the fan speed control dial.
&
Air conditioner control
The air conditioner operates only when the
engine is running.
Press the air conditioner button while the
fan is in operation to turn on the air
conditioner. When the air conditioner is
on, the “A/C” indicator light illuminates.
To turn off the air conditioner, press the
button again.
NOTE
For efficient defogging or dehumidify-
ing in cold weather, turn on the air
conditioner. If the ambient temperature
decreases to approximately 32
8
F (0
8
C),
the air conditioner and dehumidifica-
tion system may not operate properly.
&
Air inlet selection
Select the air inlet by pressing the air inlet
selection button.
.
Recirculation:
When the indicator light on the air inlet
selection button illuminates, interior air is
recirculated inside the vehicle. Press the
air inlet selection button to the ON position
in the following cases.
– When driving on a dusty road
– When you want cooling perfor-
mance to increase (for example, in
particularly hot weather)
.
Outside air circulation:
When the indicator light on the air inlet
selection button does not illuminate, out-
side air is drawn into the passenger
compartment. Press the air inlet selection
button to the OFF position in the following
cases.
– When the road is no longer dusty
– When the interior has cooled to a
comfortable temperature
WARNING
Continued operation in the ON posi-
tion may fog up the windows. Switch
to the OFF position as soon as the
outside conditions are no longer
dusty.
NOTE
When outside air circulation is se-
lected, the system may automatically
adjust the air inlet setting depending on
such factors as the temperature
setting, the temperature inside the
vehicle, or conditions outside the ve-
hicle.
&
To turn off the climate control
system
To turn off the climate control system:
.
Type A: Select the “OFF” position using
the fan speed control dial.
.
Type B and C: Press the ON/OFF
button.
Climate control/Manual climate control operation
4-9
4
(250,1)
Defrosting
Select the “
” or “ ” mode to defrost or
dehumidify the windshield and front door
windows.
NOTE
.
When the “
” or “ ” mode is
selected, the air conditioner compres-
sor operates automatically regardless
of the position of the air conditioner
button to defrost the windshield more
quickly. However the indicator on the
air conditioner button may not illumi-
nate. At the same time, the air inlet
selection is automatically set to the
outside air mode.
For type A climate control system, in
this state:
– You cannot stop the air condi-
tioner compressor by pressing the
air conditioner button.
– You cannot select the recircula-
tion mode by pressing the air inlet
selection button.
.
For types B and C climate control
system, after defrosting the windshield
by pressing the defroster button “
”,
pressing the button again returns the
system to the setting that had been
selected before the defroster was acti-
vated.
Operating tips for heater and
air conditioner
&
Cleaning ventilation grille
1)
Front ventilation inlet grille
Always keep the front ventilation inlet grille
free of snow, leaves, or other obstructions
to ensure efficient heating and defrosting.
Since the condenser is located in front of
the radiator, this area should be kept clean
because cooling performance is impaired
by any accumulation of insects and leaves
on the condenser.
Climate control/Defrosting
4-10
(251,1)
&
Efficient cooling after parking
in direct sunlight
After parking in direct sunlight, drive with
the windows open for a few minutes to
allow outside air to circulate into the
heated interior. This results in quicker
cooling by the air conditioner. Keep the
windows closed during the operation of the
air conditioner for maximum cooling effi-
ciency.
&
Lubrication oil circulation in
the refrigerant circuit
Operate the air conditioner compressor at
a low engine speed (at idle or low driving
speeds) a few minutes each month during
the off-season to circulate its oil.
&
Checking air conditioning
system before summer sea-
son
Check the air conditioner unit for refriger-
ant leaks, hose conditions, and proper
operation each spring. Have the air con-
ditioning system checked by your
SUBARU dealer.
&
Cooling and dehumidifying in
high humidity and low tem-
perature weather conditions
Under certain weather conditions (high
relative humidity, low temperatures, etc.) a
small amount of water vapor emission
from the air outlets may be noticed. This
condition is normal and does not indicate
any problem with the air conditioning
system.
&
Air conditioner compressor
shut-off when engine is
heavily loaded
To improve acceleration and gas mileage,
the air conditioner compressor is designed
to temporarily shut off during air condi-
tioner operation whenever the accelerator
is fully depressed such as during rapid
acceleration or when driving on a steep
upgrade.
&
Refrigerant for your climate
control system
Your air conditioner uses ozone friendly
refrigerant R-1234yf (HFO-1234yf). Con-
sult your SUBARU dealer for service.
Repairs needed as a result of using the
wrong refrigerant are not covered under
warranty.
Air filtration system
Your vehicle’s air conditioning system is
equipped with an air filtration system.
Replace the cabin air filter according to
the replacement schedule found in the
“Warranty and Maintenance Booklet”. This
schedule should be followed to maintain
the filter’s dust collection ability. Under
extremely dusty conditions, the filter
should be replaced more frequently. Have
your filter checked or replaced by your
SUBARU dealer. For replacement, use
only a genuine SUBARU air filter kit.
CAUTION
Contact your SUBARU dealer if the
following occurs, even if it is not yet
time to change the filter:
.
Reduction of the airflow through
the vents.
.
Windshield gets easily fogged or
misted.
NOTE
The filter can influence the air condi-
tioning, heating and defroster perfor-
mance if not properly maintained.
– CONTINUED –
Climate control/Air filtration system
4-11
4
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст