Jaguar X-Type Sedan and Estate (Wagon). Manual — part 164
48. Position and adjust the special tool engine height adjusters.
49. Remove the engine support bracket.
50. Detach the support bar.
51. Remove the support bar.
52. Remove the spacer.
53. NOTE: Left-hand shown, right-hand similar.
Remove the front subframe reinforcement plate retaining bolts.
54. NOTE: Left-hand shown, right-hand similar.
Remove the front subframe reinforcement plate.
55. NOTE: Left-hand shown, right-hand similar.
Detach the front subframe.
56.
W ARNING: Rotate the special tool height adjustment valve
slowly. Failure to follow this instruction may result in personal injury.
Remove the engine and transaxle assembly.
Rotate the special tool height adjustment valve counter clockwise.
57. Remove the coolant system top hose.
Remove and discard the gasket.
58. Remove the transaxle mount.
59. Install the special tool.
60. Remove the left-hand exhaust manifold heat shield.
61. Install the special tool.
62. Remove the upper exhaust heat shield.
63. Remove the center exhaust heat shield retaining bolts.
64. Remove the center exhaust heat shield.
65. Install the special tool.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст