Jaguar X-Type Sedan and Estate (Wagon). Manual — part 198
Vehicles built up to VIN:E43868
9. Disconnect the fuel pump fuel supply and return lines.
For additional information, refer to:
Quick Release Coupling - Push
Connect
(310-00 Fuel System - General Information, General
Procedures).
Install blanking plugs to the fuel pump fuel supply and return line
male and female connectors.
10. Detach the power steering fluid hose from the fuel return line.
11. Remove the power steering fluid reservoir retaining nuts.
12. Detach the power steering fluid reservoir.
13. Secure the power steering fluid reservoir to one side.
14. Remove the engine mount damper.
15. NOTE: Mark the position of the engine mount before removal.
Remove the engine mount and bracket assembly.
16. Remove the engine mount.
Vehicles built from VIN:E43869
17. Disconnect the fuel pump fuel supply and return lines.
For additional information, refer to:
Quick Release Coupling - Push
Connect
(310-00 Fuel System - General Information, General
Procedures).
Install blanking plugs to the fuel pump fuel supply and return line
male and female connectors.
18. Detach the power steering fluid hose from the fuel return line.
19. Remove the power steering fluid reservoir retaining nuts.
20. Detach the power steering reservoir away from the power steering
reservoir retaining bracket.
21. NOTE: Mark the position of the engine mount before removal.
Remove the engine mount and bracket assembly.
22. Remove the engine mount.
Installation
Vehicles built from VIN:E43869
1. NOTE: Clean the front engine mount mating faces.
To install, reverse the removal procedure.
Tighten to 80 Nm.
2. Tighten to 80 Nm.
3. Tighten to 10 Nm.
Vehicles built up to VIN:E43868
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст