Jaguar X-Type Sedan and Estate (Wagon). Manual — part 459
Published: 11-May-2011
Fuel System - General Information - Quick Release Coupling - Push Connect
General Procedures
Disconnect
1. WARNINGS:
Place the vehicle in a quarantined area and arrange "No
Smoking/Fuel Vapors" signs about the vehicle.
Before any work is carried out on the fuel system, ground the vehicle
to earth and maintain the ground connection until the work is complete.
Do not smoke or carry lighted tobacco or open flame of any type
when working on or near any fuel related components. Highly flammable
vapors are always present and may ignite. Failure to follow these
instructions may result in personal injury.
Do not carry or operate cellular phones when working on or near any
fuel related components. Highly flammable vapors are always present and
may ignite. Failure to follow these instructions may result in personal
injury.
The fuel system remains pressurized for a long time after the
ignition is switched off. The fuel pressure must be relieved before
attempting any repairs. Failure to follow these instructions may result in
personal injury.
After carrying out repairs, the fuel system must be checked visually
for leaks. Failure to follow these instructions may result in personal injury.
This procedure involves fuel handling. Be prepared for fuel spillage
at all times and always observe fuel handling precautions. Failure to follow
these instructions may result in personal injury.
Disconnect the battery ground cable.
For additional information, refer to:
Battery Disconnect and Connect
(414-01 Battery, Mounting and Cables, General Procedures).
2. Relieve the fuel pressure.
For additional information, refer to: Fuel System Pressure Release.
3. Disconnect the fuel line quick release coupling.
1. Press the fuel line quick release coupling locking tangs.
2. Disconnect the fuel line quick release coupling.
4. Disconnect the fuel line quick release coupling.
1. Pull the fuel line quick release coupling locking tang.
2. Push the clip through the fuel line quick release coupling to
release the fuel line.
5. Disconnect the fuel line quick release coupling.
1. Press the fuel line quick release coupling locking tangs.
2. Disconnect the fuel line quick release coupling.
6. Disconnect the fuel line quick release coupling.
Press the fuel line quick release coupling buttons and pull the fuel
line to disconnect.
7. Release the fuel tank vent line quick release coupling.
Press the fuel tank vent line quick release coupling locking release
collar.
8. Disconnect the fuel tank vent line quick release coupling.
9. Release the fuel line quick release coupling.
Press the fuel line quick release coupling locking release collar.
10. Disconnect the fuel line quick release coupling.
11. Using a suitable
Flat-bladed screwdriver
release the fuel line quick
release coupling secondary locking tang.
12. Operate the fuel line quick release coupling primary locking tang.
Push the fuel line quick release coupling primary locking tang into
from the fuel line quick release coupling.
13. Disconnect the fuel line from the fuel line quick release coupling.
Connect
• W ARNINGS:
Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly
flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
Do not carry or operate cellular phones when working on or near any fuel related components. Highly flammable vapors are always
present and may ignite. Failure to follow these instructions may result in personal injury.
This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions. Failure
to follow these instructions may result in personal injury.
After carrying out repairs, the fuel system must be checked visually for leaks. Failure to follow these instructions may result in
personal injury.
1. Install the fuel line to the fuel line quick release coupling.
2.
CAUTION: Make sure the quick release coupling primary locking
tang clicks into place when installing.
Insert the fuel line quick release coupling secondary locking tang into
the fuel line quick release coupling.
3.
CAUTION: After installation, to make sure that the fuel line is fully
seated, pull on the line.
Install the fuel line quick release coupling.
4.
CAUTION: After installation, to make sure that the vent line is
fully seated, pull on the line.
Install the fuel tank vent line quick release coupling.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст