Jaguar X-Type Sedan and Estate (Wagon). Manual — part 161
100. Using the special tool, remove and discard the link shaft oil seal.
All vehicles
101. Remove the starter motor.
102. Remove the dust cover.
103. Remove the access cover.
104. Remove the transaxle retaining bolts.
105. Remove the transaxle retaining bolts.
106. Remove the transaxle.
Published: 11-May-2011
Engine - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6 - AJ27 - EngineVehicles
With: 5-Speed Automatic Transaxle - JATCO/6-Speed Automatic Transaxle - AWF21
Removal
Special Tool(s)
Powertrain Assembly Jack
HTJ1200-2
5 Point Security Torx Bit
418-535
Ball joint splitter
204-192
W heel hub puller
205-491
Adaptor nuts
205-491-01
Forcing screw
204-269
Slide hammer
100-012
Slide hammer shaft
100-012-02
Halfshaft remover fork
204-226
Right-hand halfshaft splitter
307-442
Right-hand halfshaft splitter handle
307-443
Pinion oil seal remover
308-208
Link shaft limiting tool
307-446
Engine lifting kit
303-707
Removal
All vehicles
1. NOTE: Left-hand shown, right-hand similar.
Loosen the front hub retaining nuts.
2. Drain the transaxle.
For additional information, refer to:
Transmission Fluid Drain and Refill
(307-01B Automatic Transmission/Transaxle - Vehicles W ith: 6-Speed
Automatic Transaxle - AWF21, General Procedures).
3. Remove the steering column lower retaining bolt.
4. Remove the battery tray.
For additional information, refer to:
Battery Tray
(414-01 Battery,
Mounting and Cables, Removal and Installation).
5. Recover the air conditioning (A/C) refrigerant.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст