Jaguar X-Type Sedan and Estate (Wagon). Manual — part 443
37. Attach the engine roll restrictor.
Tighten to 80 Nm
38. Tighten to 80 Nm.
Vehicles with manual transmission
39. Fill the manual transmission to the correct oil level. For additional
information, refer to: (308-03 Manual Transmission/Transaxle)
Transaxle Draining and Filling - Vehicles With: 5-Speed Manual
Transmission - MT75
(General Procedures),
Transaxle Draining and Filling - Vehicles With: 5-Speed Manual
Transmission - MT75
(General Procedures).
Vehicles with automatic transmission
40. Connect the selector lever cable.
41. Attach the selector lever cable bracket.
Tighten to 10 Nm.
42. Fill the automatic transmission to the correct oil level.
For additional information, refer to:
Transmission Fluid Drain and Refill
(307-01A Automatic Transmission/Transaxle - Vehicles W ith: 5-Speed
Automatic Transaxle - JATCO, General Procedures).
43. Install the selector lever cable shield.
Tighten to 10 Nm.
All vehicles
44. Install the muffler inlet pipe.
For additional information, refer to:
Muffler Inlet Pipe - 2.0L NA V6 -
AJV6/2.5L NA V6 - AJV6/3.0L NA V6 - AJ27
(309-00 Exhaust System,
Removal and Installation).
45. Install the front pipe.
Tighten to 55 Nm.
46. Install the fender splash shield access panel.
47. Install the right-hand front wheel and tire.
For additional information, refer to:
Wheel and Tire
(204-04 Wheels and
Tires, Removal and Installation).
48. Tighten the shock absorber and spring assembly securing nuts.
Tighten to 25 Nm.
49. NOTE: Install a new steering column lower retaining bolt.
Attach the steering column.
Published: 11-May-2011
Exhaust System -
Torque Specifications
Description
Nm lb-ft lb-in
Catalytic converter retaining studs - vehicles without diesel engines
9
-
80
Catalytic converter to exhaust manifold retaining nuts - vehicles without diesel engines
A
-
-
Catalytic converter - right-hand - to transfer case mounting bracket retaining bolts - vehicles without diesel engines
25 18
-
Catalytic converter - left-hand - to support bracket retaining bolts - vehicles without diesel engines
25 18
-
Muffler and tailpipe clamp retaining nut - all vehicles
48 35
-
Front muffler to muffler inlet pipe retaining nuts - vehicles without diesel engines
48 35
-
Muffler inlet pipe to front pipe retaining nut and bolt - vehicles without diesel engines
48 35
-
Exhaust hanger to front muffler retaining bolt - all vehicles
25 18
-
Heated oxygen sensor (HO2S) - vehicles without diesel engines
40 30
-
Catalyst monitor sensor - vehicles without diesel engines
40 30
-
Exhaust hanger to body retaining bolts - all vehicles
25 18
Exhaust heat shield retaining bolts - vehicles without diesel engines
10 -
89
Catalytic converter heat shield retaining bolts - vehicles without diesel engines
10 -
89
Air cleaner bracket retaining nuts - vehicles without diesel engines
6
-
53
Catalytic converter to turbocharger retaining nuts - vehicles with diesel engines
48 35
-
Catalytic converter retaining bolts - vehicles with diesel engines
48 35
-
Turbocharger heat shield retaining nuts - vehicles with diesel engines
8
-
71
Turbocharger heat shield retaining bolts - vehicles with diesel engines
8
-
71
Exhaust flexible pipe to catalytic converter retaining nuts - vehicles with diesel engines
48 35
-
Front muffler to exhaust flexible pipe retaining nuts - vehicles with diesel engines
48 35
-
Exhaust flexible pipe to diesel particulate filter retaining nuts - vehicles with diesel engines
48 35
-
Diesel particulate filter to muffler inlet pipe retaining nuts - vehicles with diesel engines
48 35
-
Diesel particulate filter pressure sensor mounting bracket retaining nuts - vehicles with diesel engines
5
-
44
Catalytic converter temperature sensor - vehicles with diesel engines
35 26
-
Diesel particulate filter temperature sensor - vehicles with diesel engines
35 26
-
A = refer to the procedure for the correct torque sequence
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст