Jaguar X-Type Sedan and Estate (Wagon). Manual — part 291
Published: 11-May-2011
Accessory Drive - Accessory Drive Belt Tensioner2.0L Duratorq-TDCi/2.2L
Duratorq-TDCi (110kW/150PS) - Puma
Removal and Installation
Special Tool(s)
Release tool, belt tensioner
303-676
Removal
1. Disconnect the battery ground cable.
For additional information, refer to:
Battery Disconnect and Connect
(414-01 Battery, Mounting and Cables, General Procedures).
2. Remove the air deflector.
For additional information, refer to:
Air Deflector - 2.0L Duratorq-
TDCi/2.2L Duratorq-TDCi (110kW /150PS) - Puma
(501-02 Front End Body
Panels, Removal and Installation).
3. Remove the right-hand road wheel.
For additional information, refer to:
Wheel and Tire
(204-04 Wheels and
Tires, Removal and Installation).
4. Remove the right-hand wheel arch liner access panel.
5. Using the special tool, detach the accessory drive belt.
6. Detach the generator positive cable.
7. Disconnect the generator electrical connector.
8. Remove the generator upper retaining bolt.
9. Detach the generator.
Slide the generator rearwards as far away from the accessory drive
belt tensioner assembly as possible.
10. Detach the accessory drive belt tensioner assembly.
11. Detach the accessory drive belt.
12. Remove the accessory drive belt tensioner.
Installation
1. Install the accessory drive belt tensioner.
2. Attach the accessory drive belt.
3. Attach the accessory drive belt tensioner assembly.
Tighten to 47 Nm.
4. NOTE: Loosely install the generator retaining nuts.
Attach the generator.
5. Install the generator retaining bolt.
Tighten to 47 Nm.
6. Tighten to 47 Nm.
7. Connect the generator electrical connector.
8. Attach the generator positive cable.
Tighten to 8 Nm.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст