Jaguar X-Type Sedan and Estate (Wagon). Manual — part 34
Published: 11-May-2011
Front Suspension - Wheel Knuckle
Removal and Installation
Special Tool(s)
Ball joint splitter
204-192
Wheel hub puller
205-491
Adapter nuts
205-491-01
Forcing screw
204-269
Knuckle splitter
204-159
Removal
1. Loosen the wheel hub nut.
2. Remove the wheel and tire.
For additional information, refer to:
Wheel and Tire
(204-04 Wheels and
Tires, Removal and Installation).
3.
CAUTION: Secure the brake caliper anchor plate assembly to one
side.
Remove the brake caliper and anchor plate assembly.
4.
CAUTION: Only one side of the subframe needs to be lowered to
detach the lower arm ball joint.
Remove the front subframe reinforcement plate retaining bolts.
5. Loosen the front subframe rear mount retaining bolt.
6. Loosen the front subframe front mount retaining bolt.
7.
CAUTION: To prevent damage to the lower arm bushing, make
sure the subframe is lowered before detaching the lower arm ball joint.
Detach the wheel knuckle.
1. Remove the lower arm ball joint retaining nut and bolt.
2. Reposition the lower arm.
3. Detach the wheel knuckle.
8. Remove and discard the wheel hub nut.
9. Using the special tools, detach the halfshaft.
10. Remove the wheel knuckle pinch bolt.
11. Remove the wheel knuckle.
1. Using the special tool, spread the wheel knuckle.
2. Remove the wheel knuckle.
Installation
1. Attach the wheel knuckle to the strut and spring assembly.
1. Using the special tool, spread the wheel knuckle.
2. Attach the wheel knuckle.
Tighten to 85 Nm.
2. Attach the wheel knuckle.
1. Reposition the lower arm.
2. Attach the wheel knuckle.
3. Attach the lower arm ball joint retaining nut and bolt.
4. Tighten to 83 Nm.
3. Tighten the front subframe front mount retaining bolt.
Tighten to 142 Nm.
4. Loosely install the subframe rear mount retaining bolt.
5. Tighten the front subframe reinforcement plate retaining bolts.
Tighten to 35 Nm.
6. Tighten to 142 Nm.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст