Jaguar 5HP24 transmission. Manual — part 25
Insert cup spring 74.020.
Use assembly bracket 5x46 001 502 to
press the cup spring down in the mandrel
press and secure it with the split stop-
ring 74.030.
Turn over cylinder DE by 180°. Put two
O-rings (73.010/152 and 73.010/154) on
piston D 73.010/150 and press it into the
cylinder.
Insert cup spring D 73.010/160.
Using assembly bracket 5x46 001 501,
press down cup spring D in the mandrel
press and secure it with snap ring
73.101/170 (flat side upwards).
3.3/6
97113
97114
97115
Insert the complete clutch pack D, begin-
ning with spring clutch disc 73.010/180.
This is followed by outer clutch disc
73.010/190 and lined clutch disc
73.010/200.
Secure top outer clutch disc 73.010/210
with snap ring 73.010/220.
Important!
Making adjustments: see Chapter 1.4.2
Turnover cylinder DE and insert com-
plete clutch pack E beginning with outer
disc 74.050 followed alternately by
clutch lined disc 74.060 and outer disc.
Secure top outer disc 74.070 with snap
ring 74.090.
Important!
Making adjustments: see Chapter 1.4.3
Lubricate axial needle roller bearing
32.340/120 with petroleum jelly and
attach it to the cylinder ridge 73.010/110
(on the brake E side).
3.3/7
97231
97232
97233
Put brakes (E and D) on the planetary
drive, turning it backwards and forwards
until the clutch pack engages fully with
the splines. Control dimension: shaft
(planet spider) to bushing (cylinder DE)
approx. 61.5 mm.
3.3/8
97234
3.3.3
Assembly of clutch C
Mount new O-rings (75.010/130 and
75.010/140) on piston C 75.010/120.
Press the piston into cylinder C 75.010/110.
3.3/9
97235
5 HP 24
/130
/150
/160
/210
/140
/110
/120
/190
/180
/170
/200
/110
/120
/130
75.140
75.010
31.090
31.050
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст