Jaguar XJ (X350). Manual — part 363
•
Tighten 45 Nm.
73 . Install the water pump and coolant hose assembly.
5. Attach the hose.
6. Install the water pump and coolant hose assembly.
•
Tighten to 25 Nm.
74 . NOTE:
Install new coolant crossover O-ring seals.
Install the coolant crossover tube.
•
Install new O-ring seals.
•
Tighten to 10 Nm.
75 . Install the engine oil pressure and oil temperature sensors.
•
Tighten to 14 Nm.
76 . NOTE:
Install new O-ring seals.
Install the oil filter housing assembly.
•
Tighten all oil filter housing retaining bolts to 25 Nm.
www.
77 . Tighten the oil filter housing assembly retaining bolts in sequence.
•
Tighten to 150 Nm.
•
Tighten to 40 Nm + 90 degrees.
78 . Install the engine rear backing plate.
79 . Install the flexplate.
•
Prevent the engine from rotating.
•
Tighten to 80 Nm.
80 . NOTE:
Right-hand shown, left-hand similar.
Install the exhaust manifolds.
•
Tighten to 25 Nm.
81 . NOTE:
Right-hand shown, left-hand similar.
Install the exhaust manifold heat shields.
•
Tighten to 10 Nm.
82 . NOTE:
Install a new O-ring seal.
Install the oil level indicator tube.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст