Jaguar XJ (X350). Manual — part 1019
-> Yes
Suspect : - ECM connector - ECM
-> No
REPAIR the high resistance circuit. For additional information, refer to the wiring diagrams. Clear any
DTCs, test the system for normal operation.
G549822t235 : CHECK THE APP2 SENSOR RETURN CIRCUIT FOR SHORT
CIRCUIT TO POWER
1. Measure the resistance between:
CR14, harness side
Battery
Pin 06
Positive terminal
Is the resistance greater than 100 Kohms?
-> Yes
GO to Pinpoint Test G549822t236.
-> No
GO to Pinpoint Test G549822t241.
G549822t236 : CHECK THE APP2 SUPPLY AND RETURN CIRCUITS FOR
SHORT CIRCUIT TO EACH OTHER
1. Key off. 2. Disconnect the ECM connector, EC66. 3. Key on, engine off. 4. Measure the resistance
between:
CR14, harness side CR14, harness side
Pin 02
Pin 06
Is the resistance greater than 100 Kohms?
-> Yes
GO to Pinpoint Test G549822t237.
-> No
REPAIR the short circuit. For additional information, refer to the wiring diagrams. Clear any DTCs, test
the system for normal operation.
G549822t237 : CHECK THE APP2 SENSOR TO ECM RETURN CIRCUIT FOR
HIGH RESISTANCE
1. Measure the resistance between:
CR14, harness side EC66, harness side
Pin 06
Pin B2
Is the resistance less than 10 ohms?
-> Yes
Suspect : - ECM connector - ECM
-> No
REPAIR the high resistance circuit. For additional information, refer to the wiring diagrams. Clear any
DTCs, test the system for normal operation.
G549822t238 : CHECK THE APP2 SUPPLY AND RETURN CIRCUITS FOR
SHORT CIRCUIT TO EACH OTHER
1. Key off. 2. Disconnect the ECM connector, EC66. 3. Measure the resistance between:
CR14, harness side CR14, harness side
Pin 02
Pin 06
Is the resistance greater than 100 Kohms?
-> Yes
GO to Pinpoint Test G549822t239.
-> No
REPAIR the short circuit. For additional information, refer to the wiring diagrams. Clear any DTCs, test
the system for normal operation.
G549822t239 : CHECK WHETHER THE SHORT CIRCUIT TO GROUND IS IN
THE HARNESS OR THE MODULE
1. Measure the resistance between:
www.
CR14, harness side
Battery
Pin 02
Negative terminal
Is the resistance greater than 100 Kohms?
-> Yes
Suspect: - ECM
-> No
REPAIR the short circuit. For additional information, refer to the wiring diagrams. Clear any DTCs, test
the system for normal operation.
G549822t240 : CHECK WHETHER THE SHORT CIRCUIT TO POWER IS IN THE
HARNESS OR THE MODULE
1. Key off. 2. Disconnect the ECM connector, EC66. 3. Key on, engine off. 4. Measure the resistance
between:
CR14, harness side
Battery
Pin 02
Positive terminal
Is the resistance greater than 100 Kohms?
-> Yes
Suspect: - ECM
-> No
REPAIR the short circuit. For additional information, refer to the wiring diagrams. Clear any DTCs, test
the system for normal operation.
G549822t241 : CHECK WHETHER THE SHORT CIRCUIT TO POWER IS IN THE
HARNESS OR THE MODULE
1. Key off. 2. Disconnect the ECM connector, EC66. 3. Key on, engine off. 4. Measure the resistance
between:
CR14, harness side
Battery
Pin 06
Positive terminal
Is the resistance greater than 100 Kohms?
-> Yes
Suspect: - ECM
-> No
REPAIR the short circuit. For additional information, refer to the wiring diagrams. Clear any DTCs, test
the system for normal operation.
PINPOINT TEST G549822p18 : BRAKE
PEDAL SWITCH
G549822t242 : CHECK THE OPERATION OF THE BRAKE PEDAL SWITCH
WITH THE BRAKE PEDAL RELEASED
1. Brake pedal switch connector, CR78
Circuit
Pin
Brake pedal switch - power 01
Brake pedal switch - signal
02
2. Engine control module (ECM) connector, EC66
Circuit
Pin
Brake pedal switch - signal G2
3. Key off. 4. Disconnect the brake pedal switch connector, CR78. 5. Make sure the brake pedal is
released. 6. Measure the resistance between:
CR78, component side CR78, component side
Pin 01
Pin 02
Is the resistance less than 10 ohms?
-> Yes
GO to Pinpoint Test G549822t245.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст