Jaguar XJ (X350). Manual — part 170

CAUTION: Make sure the brake disc faces are clean before installation.

NOTE:

Left-hand shown, right-hand similar.

Install the brake pad.

Using a suitable tool, fully retract the brake caliper piston.

2 . NOTE:

Make sure the brake pad is correctly installed to the caliper piston.

NOTE:

Left-hand shown, right-hand similar.

Install the brake pad to the caliper piston.

3 . NOTE:

Left-hand shown, right-hand similar.

Install the brake caliper.

4 . NOTE:

Left-hand shown, right-hand similar.

Install the brake caliper retaining bolts.

Tighten to 28 Nm.

5 . NOTE:

Left-hand shown, right-hand similar.

Install the brake caliper retaining bolt dust covers.

www.

6 . NOTE:

Left-hand shown, right-hand similar.

Attach the brake hose.

Install new sealing washers.

Tighten to 35 Nm.

7 . NOTE:

Left-hand shown, right-hand similar.

Install the anti-rattle spring.

8 . Remove the brake pedal hold-down tool.

9

.

Bleed the brake system.

For additional information, refer to

Brake System Bleeding - VIN Range: G45704->H99999

(70.25.03)

10 . Install both front wheels and tires.

For additional information, refer to

Wheel and Tire (74.20.05)

www.