Jaguar XJ (X350). Manual — part 1466

9
.

CAUTION: Make sure that the head restraint is not withdrawn further

than 15 mm from the head restraint motor. Failure to follow this instruction may
result in damage to the vehicle.

Detach the front seat head restraint from the head restraint motor.

10 . Detach the front seat head restraint wiring harness retaining clip.

11
.

CAUTION: Make sure the cable is not trapped when the head restraint is

detached. Failure to follow this instruction may result in damage to the vehicle.

Detach the head restraint from the head restraint retaining post.

1) Align the head restraint wiring harness with the head restraint shaft.

2) Detach the head restraint from the head restraint retaining post.

12 . Detach the front seat head restraint retaining post.

1) Release the retaining tang.

2) Detach the front seat head restraint retaining post.

13 . Remove the front seat head restraint.

Remove the front seat head restraint retaining post.

Feed the head restraint wiring harness through the cover.

Installation

1 . To install, reverse the removal procedure.

www.

Front Seat Head Restraint - Vehicles With:
Head Restraint Video Display, VIN Range:
H18680->H99999 (76.70.14)

Removal

1
.

Remove the front seat backrest rear cover.
For additional information, refer to Front Seat Backrest Rear Cover - VIN Range:
H18680->H99999 (76.70.03)

2 . Remove the business tray.

3 . Disconnect and the front seat head restraint wiring harness.

4
.

CAUTION: Make sure that the head restraint is not withdrawn further

than 15 mm from the head restraint motor. Failure to follow this instruction may
result in damage to the vehicle.

Detach the front seat head restraint from the head restraint motor.

5
.

Using a suitable tape secure the front seat head restraint post clip to the front seat head
restraint wiring harness.

Release the front seat head restraint post clip from the right-hand head
restraint post.

6 . NOTE:

Apply suitable protective tape around the right-hand head restraint guide tube.

Using a suitable tool, remove the front seat head restraint.

Installation

1 . To install, reverse the removal procedure.

www.