Jaguar XJ (X350). Manual — part 430
Engine Mount LH (12.45.01)
Special Service Tools
Engine Support Beam
303-021
Engine Lifting Brackets
303-749
Removal
Vehicles without supercharger
1 . Remove the throttle body.
For additional information, refer to Throttle Body - VIN Range: G00442->G45703 (19.70.04)
For additional information, refer to Throttle Body - VIN Range: G45704->G99999 (19.70.04)
Vehicles with supercharger
2 . Remove the air cleaner outlet pipe.
For additional information, refer to Air Cleaner Outlet Pipe (19.10.31)
All vehicles
3
.
NOTE:
Vehicles with 3.5L or 4.2L engine without supercharger shown, vehicles with 4.2L engine
with supercharger similar.
Install the special tools.
4
.
NOTE:
Vehicles with 3.5L or 4.2L engine without supercharger shown, vehicles with 4.2L engine
with supercharger similar.
Install the special tool.
5 . Remove the air deflector.
6 . Remove the left-hand front wheel and tire assembly.
For additional information, refer to Wheel and Tire (74.20.05)
www.
Left-hand drive vehicle shown, right-hand drive vehicle similar.
Remove the steering gear shaft pinch bolt.
8 . NOTE:
Left-hand drive vehicle shown, right-hand drive vehicle similar.
Detach the steering gear.
9 . NOTE:
Right-hand drive vehicle shown, left-hand drive vehicle similar.
Disconnect the power steering control valve actuator electrical connector.
7 . NOTE:
10 . NOTE:
Left-hand drive vehicle shown, right-hand drive vehicle similar.
Secure the steering gear.
11 . NOTE:
Remove and discard the engine mounting securing nut.
Remove the engine mounting retaining nut.
12 . Lower the vehicle.
13
.
NOTE:
Vehicles with 4.2L engine with supercharger shown, vehicles with 3.5L or 4.2L engine
without supercharger similar.
Using the special tools, raise the engine to a suitable height.
1) Adjust the engine support beam (clockwise).
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст