Jaguar XJ (X350). Manual — part 734

Do not remove the fuel injection pump belt tensioner locking pin before installing the

tensioner.

Install the fuel injection pump belt tensioner retaining bolt.

Tighten to 25 Nm.

5 . Remove and discard the fuel injection pump belt tensioner locking pin.

6 . Install the fuel injection pump belt cover.

7 . Install the secondary bulkhead centre panel.

For additional information, refer to Secondary Bulkhead Center Panel

4

.

NOTE:

8 . Connect the battery ground cable.

For additional information, refer to Battery Connect (86.15.15)

www.

Fuel Injection Pump Pulley

Special Service Tools

Reaction arm - fuel pump pulley

303-138

Holder - fuel pump pulley

303-139

Removal

1 . Remove and discard the fuel injection pump belt.

For additional information, refer to Fuel Injection Pump Belt

2 . Remove the injection pump pulley retaining nut.

Using the special tool, retain the fuel injection pump pulley.

Remove the special tool.

3 . Using the special tool, remove the fuel injection pump pulley.

Remove the special tool.

Installation

1 . Install the fuel injection pump pulley.

2 . Install the retaining nut.

Using the special tool, retain the fuel injection pump pulley.

Tighten to 50 Nm.

3 . Install a new fuel injection pump belt.

For additional information, refer to Fuel Injection Pump Belt

www.