Jaguar XJ (X350). Manual — part 50
Tighten to 92 Nm.
2 . NOTE:
Install a new retaining nut and bolt.
Attach the front lower arm.
Stage 1: Tighten to 60 Nm.
Stage 2: Tighten 135º.
3 . Attach the rear lower arm.
4 . Attach the air spring assembly.
Tighten to 175 Nm.
5 . Attach the tie rod end.
Tighten to 75 Nm.
6 . Attach the head lamp leveling sensor retaining clip.
www.
8 . Attach the stabilizer bar link.
Tighten to 43 Nm.
9 . Install the wheel and tire assembly.
For additional information, refer to
Wheel and Tire (74.20.05)
For additional information, refer to
10
.
CAUTION: The final tightening of the rear lower arm inner retaining nut and bolt
must be carried out with the vehicle on its wheels.
Tighten to 175 Nm.
7 . Install the stabilizer bar link.
11 . Tighten to 70 Nm.
12 . Carry out the camber and caster adjustment.
For additional information, refer to
Camber and Caster Adjustment
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст