Jaguar XJ (X350). Manual — part 707
4
.
CAUTION: Do not allow the unions to hit the olive ends of the high-pressure fuel
supply line as this may damage the ends of the line and allow foreign matter enter the fuel
injection system.
NOTE:
Left-hand shown, right-hand similar.
Install new high-pressure fuel supply line.
1)
Install the new high-pressure fuel supply line, tighten the fuel supply line
unions finger tight.
Tighten the high-pressure fuel supply line in the sequence shown in four
stages:
Stage 1: Tighten the high-pressure fuel supply line union 1 to 15 Nm.
Stage 2: Tighten the high-pressure fuel supply line union 2 to 15 Nm.
Stage 3: Tighten the high-pressure fuel supply line union 1 to 30 Nm.
Stage 4: Tighten the high-pressure fuel supply line union 2 to 30 Nm.
5 . NOTE:
Left-hand shown, right-hand similar.
Attach the injector harness to the fuel rail.
6 . NOTE:
Left-hand shown, right-hand similar.
Install the injector sound proofing.
7 . Install the secondary bulkhead center panel.
For additional information, refer to Secondary Bulkhead Center Panel
8 . Connect the battery ground cable.
For additional information, refer to Battery Connect (86.15.15)
www.
Intake Air Shutoff Throttle
Removal
1 . Remove the oil filler cap.
2 . Remove the engine cover.
3 . Detach the coolant hose.
4 . Remove the retaining bolt.
5 . Disconnect the electrical connectors.
6 . Detach the intake air shutoff throttle elbow.
Release the retaining clip.
7 . Detach the vacuum hoses.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст