Jaguar XJ (X350). Manual — part 433

Installation

1

.

CAUTION: Make sure the engine mount location peg is correctly located into the

engine bracket. Failure to follow this instruction may result in damage to the vehicle.

NOTE:

Install a new engine mounting securing nut.

To install, reverse the removal procedure.

Tighten to 55 Nm (+/- 15%).

2 . Tighten to 40 Nm (+/- 15%).

3 . NOTE:

Install a new engine mounting securing nut.

Tighten to 63 Nm (+/- 15%).

www.

Exhaust Manifold RH - VIN Range:
G00442->G45703 (30.15.56)

Removal

1 . Remove the exhaust system. <<309-00>>

2 . Remove the right-hand exhaust manifold heat shield

3 . Detach the exhaust gas recirculation (EGR) valve.

Remove and discard the retaining nuts and gasket.

4 . Remove the right-hand exhaust manifold heat shield/gasket retaining bolt.

5 . NOTE:

New exhaust manifold retaining studs must be fitted if the old studs are removed.

Remove the exhaust manifold.

Remove and discard the retaining nuts and heat shield/gasket.

Installation

1

.

CAUTION: When all retaining nuts have been torqued, re-torque all retainig nuts to

25 Nm.

CAUTION: Ensure exhaust manifold and heat shield/gasket is correctly aligned to

cylinder head and studs.

Install the exhaust manifold.

Install new retaining nuts and a new heat shield/gasket.

Tighten to 25 Nm.

www.