Jaguar XJ (X350). Manual — part 394
8
.
Install the throttle body.
For additional information, refer to Throttle Body - Vehicles Without: Supercharger, VIN
Range: G00442->G45703 (19.70.04)
For additional information, refer to Throttle Body - Vehicles Without: Supercharger, VIN
Range: G45704->G99999 (19.70.04)
All Vehicles
9 . Attach the evaporative emission canister purge valve hose.
10 . Remove the special tool from the left-hand rear of the engine.
11 . Remove the special tool from the right-hand rear of the engine.
12 . Attach the fuel line retaining bracket.
13 . Connect the fuel line.
Install new O-ring seals.
Attach the fuel line retaining clip.
14
.
Install the power steering fluid reservoir.
For additional information, refer to Power Steering Fluid Reservoir - 3.0L/3.5L/4.2L
(57.15.08)
15 . Attach the wiring harness retaining clip.
www.
16 . Connect the engine control module (ECM) electrical connector.
Tighten to 6 Nm.
17 . Attach the engine harness earth.
18 . Connect the engine harness electrical connector.
19 . Connect the engine harness electrical connector.
20 . Install the cabin air filter housing.
21 . Install the engine compartment cover.
22 . Install the engine compartment support.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст