Jaguar XJ (X350). Manual — part 165
9
—
Brake caliper anchor plate retaining bolts
For vehicles without Brembo brakes, the brake system consists of the following components:
•
Brake pads
•
Double piston, floating calipers
•
Brake discs
•
Brake caliper anchor plates
•
Steel braided brake hoses
The brake caliper has two retaining bolts that attach the brake caliper to the anchor plate. These are
of double, sliding piston type which makes sure equal effort is applied through both brake pads. The
anchor plate is attached to the wheel knuckle with two bolts. The hydraulic system provides separate
circuits for each pair of diagonally opposed wheels (i.e. left front, right rear and right front, left rear).
The brake disc is manufactured from cast iron and is of the vented type. It is retained on the hub by
two retaining clips and the wheel studs.
Vehicles with Brembo brakes
Item
Part Number
Description
1
—
Brake pads
2
—
Brake pad anti-rattle spring
3
—
Brake pad retaining pins
4
—
Brake disc shield
5
—
Brake caliper retaining bolts
6
—
Brake disc shield retaining rivets
7
—
Brake disc retaining clips
8
—
Brake disc
9
—
Brake caliper
For vehicles with Brembo brakes, the brake system consists of the following components:
•
Brake pads
•
Four piston, fixed calipers
•
Drilled brake discs
•
Steel braided brake hoses
The brake caliper has two retaining bolts that attach the brake caliper to the wheel knuckle. These
are of four piston fixed type which makes sure that equal effort is applied through both brake pads.
The hydraulic system provides separate circuits for each pair of diagonally opposed wheels (i.e. left
front, right rear and right front, left rear).
The brake disc is manufactured from cast iron and is of the vented type. It is retained on the hub by
two retaining clips and the wheel studs.
www.
Front Disc Brake - VIN Range: G45704-
>G99999
Vehicles with standard brakes
Item
Part Number
Description
1
—
Brake disc shield
2
—
Brake caliper anchor plate
3
—
Brake caliper retaining bolt dust covers
4
—
Brake caliper retaining bolts
5
—
Brake caliper
6
—
Anti-rattle spring
7
—
Brake pads
8
—
Brake disc
For vehicles with standard brakes, the brake system consists of the following components:
•
Brake pads
•
Single piston, floating calipers
•
Brake discs
•
Brake caliper anchor plates
•
Steel braided brake hoses
The brake caliper has two retaining bolts that attach the brake caliper to the anchor plate. These are
of single, sliding piston type. The anchor plate is attached to the wheel knuckle with two bolts. The
hydraulic system provides separate circuits for each pair of diagonally opposed wheels (i.e. left front,
right rear and right front, left rear).
The brake disc is manufactured from cast iron and is of the vented type. It is retained on the hub by
two retaining clips and the wheel studs.
Vehicles with high performance brakes
Item
Part Number
Description
1
—
Brake disc shield
2
—
Brake caliper anchor plate
3
—
Brake caliper retaining bolt dust covers
4
—
Brake caliper retaining bolts
5
—
Brake caliper
6
—
Anti-rattle spring
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст