Jaguar XJ (X350). Manual — part 552

Exhaust Manifold RH (30.15.56)

Removal

1 . Remove the right-hand exhaust gas recirculation (EGR) valve.

For additional information, refer to Exhaust Gas Recirculation (EGR) Valve RH

2 . Remove the right-hand turbocharger.

For additional information, refer to Turbocharger RH

3 . Remove the exhaust manifold front heat shield.

4 . Remove the exhaust manifold rear heat shield.

5 . NOTE:

New exhaust manifold retaining studs must be fitted if the old studs are removed.

Remove the exhaust manifold.

Remove and discard the retaining nuts.

6 . Remove and discard the exhaust manifold gasket.

Installation

1

.

CAUTION: Ensure the exhaust manifold and gasket are correctly aligned to the

cylinder head and studs.

NOTE:

New exhaust manifold retaining studs must be fitted if the old studs are removed.

To install, reverse the removal procedure.

Install a new exhaust manifold gasket.

Install new exhaust manifold retaining nuts.

Tighten to 23 Nm.

www.

2 . Tighten to 10 Nm.

3 . Tighten to 10 Nm.

Flexplate (12.53.13)

Removal

1 . Remove the transmission.

For additional information, refer to

2 . NOTE:

Prevent the flexplate from rotating.

Remove the flexplate.

Installation

1 . NOTE:

Make sure the crankshaft and flexplate mating faces are clean before installation.

NOTE:

The flexplate will only locate in one position.

NOTE:

Install, but do not tighten, the flexplate retaining bolts.

Install the flexplate.

Prevent the flexplate from rotating.

www.