Jaguar XJ (X350). Manual — part 644
(injector DTCs also flagged)
Ignition coil failure
Spark plug
failure/fouled/incorrect gap
Cylinder compression low
G45704->G99999 For
injector circuit tests
(vehicles without
supercharger), GO to
Pinpoint Test G240048p1.
For injector circuit tests
(vehicles with
supercharger), GO to
Pinpoint Test G240048p3.
For spark plug tests,
Engine Ignition - VIN Range:
G45704->G99999
P131600
Injector driver misfire -
emissions damage
Injector driver module codes
detected
Check for associated DTCs
and refer to the DTC index.
P210129
Throttle
range/performance -
sub-processor
Jammed throttle blade, gearing
or motor
Check for a message in the
instrument cluster. Replace
the throttle body.
Throttle Body - Vehicles
With: Supercharger, VIN
Range: G45704->G99999
(19.70.04)
Throttle Body - Vehicles
Without: Supercharger, VIN
Range: G45704->G99999
(19.70.04)
P210164
Throttle
range/performance
Jammed throttle blade, gearing
or motor
Check for a message in the
instrument cluster. Replace
the throttle body.
Throttle Body - Vehicles
With: Supercharger, VIN
Range: G45704->G99999
(19.70.04)
Throttle Body - Vehicles
Without: Supercharger, VIN
Range: G45704->G99999
(19.70.04)
P210329
Throttle actuator motor
control circuit high
Control circuit: short circuit to
power
ECM fault
For throttle actuator motor
circuit tests on vehicles
without supercharger, GO
to Pinpoint Test
G240048p4.
For throttle actuator motor
circuit tests on vehicles with
supercharger, GO to
Pinpoint Test G240048p5.
Refer to the warranty policy
and procedures manual if an
ECM is suspect.
P210364
Throttle actuator motor
control circuit high -
signal plausibility failure
Control circuit: short circuit to
power
ECM fault
For throttle actuator motor
circuit tests on vehicles
without supercharger, GO
to Pinpoint Test
G240048p4.
For throttle actuator motor
circuit tests on vehicles with
supercharger, GO to
Pinpoint Test G240048p5.
Refer to the warranty policy
and procedures manual if an
ECM is suspect.
P210500
Throttle actuator
control system - forced
engine shutdown
Throttle MIL request due to fuel
cut
Check for DTCs indicating
the reason for the fuel cut.
Follow the action indicated
for those DTCs.
P210629
Throttle actuator
control system - forced
limited power
Signal invalid
Check for a message in the
instrument cluster. Replace
the throttle body.
Throttle Body - Vehicles
With: Supercharger, VIN
Range: G45704->G99999
(19.70.04)
Throttle Body - Vehicles
Without: Supercharger, VIN
Range: G45704->G99999
(19.70.04)
P210664
Throttle actuator
control system - forced
limited power
Signal plausibility failure
Check for a message in the
instrument cluster. Replace
the throttle body.
Throttle Body - Vehicles
With: Supercharger, VIN
Range: G45704->G99999
(19.70.04)
www.
Throttle Body - Vehicles
Without: Supercharger, VIN
Range: G45704->G99999
(19.70.04)
P211800
Throttle actuator motor
control current
range/performance
Control circuit: short circuit to
power, short circuit to
ground, high resistance
ECM fault
For throttle actuator motor
circuit tests on vehicles
without supercharger, GO
to Pinpoint Test
G240048p4.
For throttle actuator motor
circuit tests on vehicles with
supercharger, GO to
Pinpoint Test G240048p5.
Refer to the warranty policy
and procedures manual if an
ECM is suspect.
P211900
Throttle actuator
control throttle body
range/performance
Throttle spring faulty
Check for a message in the
instrument cluster. Replace
the throttle body.
Throttle Body - Vehicles
With: Supercharger, VIN
Range: G45704->G99999
(19.70.04)
Throttle Body - Vehicles
Without: Supercharger, VIN
Range: G45704->G99999
(19.70.04)
Pinpoint Tests
CAUTION: When probing connectors to take measurements in the course of the pinpoint
tests, use the adaptor kit, part number 3548-1358-00.
NOTE:
When performing electrical voltage or resistance tests, always use a digital multimeter (DMM)
accurate to 3 decimal places, and with an up-to-date calibration certificate. When testing
resistance, always take the resistance of the DMM leads into account.
Check and rectify basic faults before beginning diagnostic routines involving pinpoint tests.
PINPOINT TEST G240048p1 : FUEL
INJECTOR CIRCUITS (VEHICLES
WITHOUT SUPERCHARGER)
G240048t1 : CHECK THE INJECTOR COIL RESISTANCE
1. Disconnect the relevant injector electrical connector:
Injector connector
Cylinder 1, PI32
Cylinder 2, PI36
Cylinder 3, PI33
Cylinder 4, PI37
Cylinder 5, PI34
Cylinder 6, PI38
Cylinder 7, PI35
Cylinder 8, PI39
2. Measure the resistance between the injector pins.
Is the resistance between 12 and 16 ohms?
-> Yes
GO to Pinpoint Test G240048t2.
-> No
INSTALL a new injector.
Fuel Injectors (18.10.02) CLEAR the DTC and test the system for normal operation.
G240048t2 : CHECK THE INJECTOR COIL INSULATION
1. Measure the resistance between:
NOTE:
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст