Jaguar XJ (X350). Manual — part 415

46 . Install the air deflector.

For additional information, refer to Air Deflector (76.11.41)

Vehicles without supercharger

47

.

Install the intake manifold.

For additional information, refer to Intake Manifold - VIN Range: G00442->G45703

(30.15.01)

Vehicles with supercharger

48 . Install the lower intake manifold.

Tighten to 22 Nm.

49 . Install the charge air cooler.

For additional information, refer to Charge Air Cooler

All vehicles

50 Install the engine front cover.

.

For additional information, refer to Engine Front Cover - VIN Range: G00442->G45703

(12.65.01)

51 . Carry out the valve clearance check.

For additional information, refer to Valve Clearance Check (12.29.47)

www.

Cylinder Head LH - VIN Range: G45704-
>G99999 (12.29.02)

Special Service Tools

Camshaft setting/locking Tool

303-530

Timing chain tensioning tool

303-532

Crankshaft setting, main tool

303-645

Removal

All vehicles

CAUTION: If a replacement cylinder head is to be installed to a vehicle with variable

camshaft timing (VCT) the cylinder head must have the oil gallery blind rivet removed before

installation.

1 . Remove the air deflector.

For additional information, refer to Air Deflector (76.11.41)

2 . Disconnect the crankshaft position (CKP) sensor electrical connector.

3 . Remove the CKP sensor.

4 . Install the special tool.

Vehicles without supercharger

5 . Remove the intake manifold.

For additional information, refer to Intake Manifold - VIN Range: G45704->G99999 (30.15.01)

Vehicles with supercharger

6 . Remove the charge air cooler.

For additional information, refer to Charge Air Cooler

www.