Jaguar XJ (X350). Manual — part 1200

14

.

Fill the cooling system up to the MAX mark on the coolant expansion tank using a fifty

percent mixture of Jaguar premium cooling system fluid or equivalent, meeting Jaguar

specification WSS M97B44-D and fifty percent water.

15 . Install the coolant expansion tank pressure cap.

16 . Raise the vehicle.

17 . Check for water leaks.

18 . Install the air deflector.

For additional information, refer to Air Deflector (76.11.41)

Blower Motor (82.25.66)

Removal

1 . Disconnect the battery ground cable. <<414-01>>

2 . Remove the passenger side instrument panel closing panel.

3 . Remove the blower motor.

1) Disconnect the electrical connector.

2) Remove the blower motor.

Installation

1 . To install, reverse the removal procedure.

www.

Heater Core (80.20.29)

Removal

1 . Disconnect the battery ground cable. <<414-01>>

2 . Remove the cowl vent screen. <<501-02>>

3 . Remove the engine compartment support.

4 . Remove the engine compartment support.

5 . Remove the cabin filter cover and cabin filter.

6 . Remove the cabin filter housing.

1) Remove the cabin filter housing retaining nuts.

2) Remove the cabin filter housing.

7 . Remove the engine compartment panel.

1) Remove the engine compartment panel retaining bolt.

2) Remove the engine compartment panel.

8 . Remove the engine control module. <<303-14A>> <<303-14B>>

9 . Remove the engine compartment panel.

1) Remove the engine compartment panel retaining clip.

2) Remove the engine compartment panel.

www.