Jaguar XJ (X350). Manual — part 1548

To install, reverse the removal procedure.

501-19 : Bumpers

Specifications

Specifications

Torque Specifications

Description

Nm lb-ft lb-in

Front bumper retaining bolts

23 17 -

Rear bumper retaining bolts

17 13 -

Rear bumper cover retaining bolts 6

-

53

www.

Description and operation

Bumpers

The vehicle is fitted with a chassis mounted aluminium beam and is covered by a one piece
color co-ordinated front bumper cover. the fitment of the front fog lights is standard, which
are mounted via brackets to the bumper covers. Inserts, side marker lamps/reflectors, and a
dorchester grey splitter vane are fitted as standard. The parking aid sensors are mounted in the
bumper cover and are fitted if the vehicle is equipped with a parking aid system. Headlamp
washers are optional.

The rear bumper beam is of aluminium construction and is covered by a one piece color co-
ordinated rear bumper cover. Inserts and side marker lamps/reflectors are fitted as standard.
The parking aid sensors are mounted in the bumper cover and are fitted if the vehicle is
equipped with a parking aid system.

Removal and installation

Front Bumper (76.22.08)

Removal

1
.

Remove the front bumper cover.
For additional information, refer to Front Bumper Cover - VIN Range: G00442-
>H18679 (76.22.78)

2 . Remove the front bumper.

1) Remove the retaining bolts.

2) Remove and discard the retaining rivets.

Installation

1 . NOTE:

The front bumper lower retaining rivets do not need to be fitted.

Tighten to 23 Nm.

www.