Jaguar XJ (X350). Manual — part 1259

Instrument Cluster (88.20.01)

Removal

1 . Lower and extend the steering column to its maximum rearward position.

2 . Disconnect the battery ground cable. <<414-01>>

3 . Remove the centre console. <<501-12>>

4 .

CAUTION: Make sure damage does not occur to the instrument panel finish panel.

Remove the instrument panel finish panel.

5 . Remove the instrument cluster finish panel.

6 . Detach the instrument cluster.

Remove the instrument cluster retaining nuts.

7 . Remove the instrument cluster.

Disconnect the electrical connectors.

Installation

1

.

NOTE:

A new instrument cluster must be configured using the Jaguar approved diagnostic

equipment.

To install, reverse the removal procedure.

www.

Instrument Cluster Lens (88.20.28)

Removal

1 . Remove the instrument cluster.

For additional information, refer to

2

.

CAUTION: Disassembly and assembly of the instrument cluster must only be carried

out in a dust free and electrostatically protected area.

CAUTION: Care must be taken when removing or installing the cluster lens not to

touch the dial faces or lens surface.

Remove the instrument cluster lens.

Installation

1

.

CAUTION: Care must be taken when installing the cluster lens to prevent damage to

the instrument cluster pointers.

To install, reverse the removal procedure.

413-06 : Horn

Specifications

Specifications

Torque Specifications

Description

Nm lb-ft lb-in

Horn Switch Retaining Screws 5

—

44

www.