Jaguar XJ (X350). Manual — part 1318

-> No

GO to Pinpoint Test G240121t101.

G240121t94 : CHECK FOR SHORT TO GROUND AT VR02, PIN 16

1. Disconnect intermediate connector, VR02. 2. Measure the resistance between VR02, pin 16 (RG)

and GROUND.

•

Is the resistance less than 10,000 ohms?

-> Yes

INSTALL a new harness between VR01 and VR02. TEST the system for normal operation.

-> No

GO to Pinpoint Test G240121t95.

G240121t98 : CHECK THE CIRCUIT BETWEEN VR01 AND VR02 FOR
CONTINUITY

1. Measure the resistance between VR01, pin 16 (RG) and VR02, pin 16 (RG).

•

Is the resistance greater than 5 ohms?

-> Yes

INSTALL a new harness between VR01 and VR02. TEST the system for normal operation.

-> No

GO to Pinpoint Test G240121t99.

G240121t95 : CHECK FOR SHORT TO GROUND AT TL91, PIN 16

1. Disconnect intermediate connector, TL91. 2. Measure the resistance between TL91, pin 16 (RG)

and GROUND.

•

Is the resistance less than 10,000 ohms?

-> Yes

INSTALL a new harness between VR02 and TL91. TEST the system for normal operation.

-> No

GO to Pinpoint Test G240121t96.

G240121t99 : CHECK THE CIRCUIT BETWEEN VR02 AND TL91 FOR
CONTINUITY

1. Measure the resistance between VR02, pin 16 (RG) and TL91, pin 16 (RG).

•

Is the resistance greater than 5 ohms?

-> Yes

INSTALL a new harness between VR02 and TL91. TEST the system for normal operation.

-> No

GO to Pinpoint Test G240121t100.

G240121t96 : CHECK FOR SHORT TO GROUND AT TL87, PIN 16

1. Measure the resistance between TL87, pin 16 (RG) and GROUND.

•

Is the resistance less than 10,000 ohms?

-> Yes

INSTALL a new harness between TL91 and TL87. TEST the system for normal operation.

-> No

GO to Pinpoint Test G240121t101.

G240121t100 : CHECK THE CIRCUIT BETWEEN TL91 AND TL87 FOR
CONTINUITY

1. Measure the resistance between TL91, pin 16 (RG) and TL87, pin 16 (RG).

•

Is the resistance greater than 5 ohms?

-> Yes

INSTALL a new harness between TL91 and TL87. TEST the system for normal operation.

-> No

GO to Pinpoint Test G240121t101.

G240121t101 : CHECK FOR VOLTAGE AT AUDIO VIDEO SELECTOR MODULE
CONNECTOR TL86

1. Disconnect the audio video selector module electrical connector, TL86. 2. Turn the ignition switch

to the ON position. 3. Measure the voltage between TL86, pin 05 (RU) and GROUND.

•

Is the voltage 5 volts?

www.

-> Yes

INSTALL a new audio video selector module,

Video System Module TEST the system for normal operation.

-> No

GO to Pinpoint Test G240121t102.

G240121t102 : CHECK FOR SHORT TO GROUND AT CONTROL PANEL
CONNECTOR RC03

1. Disconnect the control panel electrical connector, RC03. 2. Measure the resistance between RC03,

pin 05 (RU) and GROUND.

•

Is the resistance less than 10,000 ohms?

-> Yes

GO to Pinpoint Test G240121t104.

-> No

GO to Pinpoint Test G240121t103.

G240121t103 : CHECK THE CIRCUIT BETWEEN RC03 AND TL86 FOR
CONTINUITY

1. Measure the resistance between RC03, pin 05 (RU) and TL86, pin 05 (RU).

•

Is the resistance greater than 5 ohms?

-> Yes

GO to Pinpoint Test G240121t105.

-> No

INSTALL a new control panel,

Rear Passenger Entertainment Control Panel TEST the system for normal operation.

G240121t104 : CHECK FOR SHORT TO GROUND AT INTERMEDIATE
CONNECTOR RC04

1. Disconnect intermediate connector, RC04. 2. Measure the resistance between RC04, pin 05 (RU)

working towards the control panel, and GROUND.

•

Is the resistance less than 10,000 ohms?

-> Yes

INSTALL a new harness between RC03 and RC04. TEST the system for normal operation.

-> No

GO to Pinpoint Test G240121t105.

G240121t105 : CHECK THE CIRCUIT BETWEEN RC03 AND RC04 FOR
CONTINUITY

1. Measure the resistance between RC03, pin 05 (RU) and RC04, pin 05 (RU).

•

Is the resistance greater than 5 ohms?

-> Yes

INSTALL a new harness between RC03 and RC04. TEST the system for normal operation.

-> No

GO to Pinpoint Test G240121t106.

G240121t106 : CHECK FOR SHORT TO GROUND AT AUDIO VIDEO SELECTOR
MODULE CONNECTOR TL86

1. Measure the resistance between TL86, pin 05 (RU) and GROUND.

•

Is the resistance less than 10,000 ohms?

-> Yes

INSTALL a new harness between RC04 and TL86. TEST the system for normal operation.

-> No

GO to Pinpoint Test G240121t107.

G240121t107 : CHECK THE CIRCUIT BETWEEN RC04 AND TL86 FOR
CONTINUITY

1. Measure the resistance between RC04, pin 05 (RU) and TL86, pin 05 (RU).

•

Is the resistance greater than 5 ohms?

-> Yes

INSTALL a new harness between RC04 and TL86. TEST the system for normal operation.

-> No

INSTALL a new control panel,

Rear Passenger Entertainment Control Panel TEST the system for normal operation.

www.