Jaguar XJ (X350). Manual — part 188

Make sure that the brake pad with the anti-rattle spring is installed to the inboard side

of the brake disc.

NOTE:

Left-hand shown, right-hand similar.

Install the brake pads.

2

.

CAUTION: As the piston is pushed back into the caliper housing, the brake fluid level

in the reservoir will rise. Do not allow the reservoir to overflow.

CAUTION: If brake fluid comes into contact with the paintwork, the affected area

must be immediately washed down with cold water.

NOTE:

Only the extraction bolt from special tool 303-588 is used.

NOTE:

Only the forcing plate from special tool 206-080 is used.

NOTE:

Right-hand shown, left-hand similar.

NOTE:

Using the special tools, fully retract the brake caliper piston.

3 . NOTE:

Left-hand shown, right-hand similar.

Install the brake caliper retaining bolts.

1) Install the brake caliper.

2) Tighten to 28 Nm.

4 . NOTE:

Left-hand shown, right-hand similar.

Install the brake caliper retaining bolt dust covers.

www.

5 . NOTE:

Left-hand shown, right-hand similar.

Attach the brake hose.

Install new sealing washers.

Tighten to 35 Nm.

6 . NOTE:

Left-hand shown, right-hand similar.

Install the anti-rattle spring.

Vehicles with high performance brakes

7 . NOTE:

Left-hand shown, right-hand similar.

Install the logo badge.

Tighten to 5 Nm.

All vehicles

8 . Attach the parking brake cable.

9 . Remove the brake pedal hold-down tool.

www.