Jaguar XJ (X350). Manual — part 842
20 .
CAUTION: The brake caliper must be supported at all times.
NOTE:
Left-hand shown, right-hand similar.
NOTE:
Remove and discard the securing tie strap.
NOTE:
Install new brake caliper anchor plate retaining bolts.
Attach the brake caliper and anchor plate.
21 . Install the rear wheels and tires.
For additional information, refer to Wheel and Tire (74.20.05)
22 . Lower the vehicle.
23 . Fill the fuel tank with fuel.
Evaporative Emission Canister Purge Valve
- VIN Range: G00442->G45703 (17.15.30)
Removal
1 . Raise and support the vehicle. <<100-02>>
2 . Remove the left-hand front wheel and tire. <<204-04>>
3 . Remove the left-hand front fender splash shield. <<501-02>>
4 . Remove the bulkhead drain tube.
5 . Disconnect the evaporative emission canister purge valve electrical connector.
6 . Disconnect the evaporative emission canister purge valve outlet hose.
www.
7 . Disconnect the evaporative emission canister purge valve inlet hose.
8 . Remove the evaporative emission canister purge valve.
Installation
1 . To install, reverse the removal procedure.
Evaporative Emission Canister Purge Valve
- 3.0L NA V6 - AJ27, VIN Range: G45704-
>G99999 (17.15.30)
Removal
1 . Remove the engine cover.
2 . Disconnect the evaporative emission canister purge valve hose.
3 . Detach the evaporative emission canister purge valve hose.
4 . Disconnect the evaporative emission canister purge valve electrical connector.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст