Jaguar XJ (X350). Manual — part 613
4 . Remove the coolant expansion tank retaining bolt.
5 . Detach the coolant expansion tank.
6 . Disconnect the coolant expansion tank level sensor electrical connector.
7 . NOTE:
Make sure the retaining clip is not removed.
NOTE:
Clamp the coolant expansion tank lower hose to minimize coolant loss.
Remove the coolant expansion tank.
Detach the coolant expansion tank lower hose.
Installation
1 . To install, reverse the removal procedure.
Tighten to 7 Nm.
2 . Check and top up the cooling system as required.
www.
Cooling Fan Motor and Shroud (26.25.25)
Removal
1 . Disconnect the battery ground cable.
For additional information, refer to Battery Disconnect and Connect
2 . Remove the radiator splash shield.
For additional information, refer to Radiator Splash Shield (76.22.90)
3 . Disconnect the cooling fan motor and shroud electrical connectors.
4
.
Detach the cooling fan motor and shroud electrical connectors from the cooling fan motor
and shroud.
5
.
Detach the cooling fan motor and shroud wiring harness from the cooling fan motor and
shroud.
6 . Detach the air conditioning pipe.
7 . Detach the fuel fired heater hose.
8 . Disconnect the auxiliary coolant flow pump electrical connector.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст