Jaguar XJ (X350). Manual — part 197
To install, reverse the removal procedure.
Using a suitable tool, fully retract the brake caliper pistons.
Tighten to 101 Nm.
206-05 : Parking brake and Actuation
Specifications
Specifications
Description
Nm lb-ft lb-in
Parking brake caliper retaining bolts - vehicles with Brembo brakes 70 52 -
Parking brake module retaining nuts
4
-
35
Parking brake release actuator retaining bolts
20 15 -
Specifications – Armoured XJ
)*+
,-
./ÿ
0+
*,1ÿ
2*3
-
41+
ÿ
5
6ÿ
78113
ÿ
890ÿ
+
15
*-
.-
./ÿ
063
5
:ÿ
;<ÿ=>ÿ?
)*+
,-
./ÿ
0+
*,1ÿ
2*3
-
41+
ÿ
06@Aÿ
+
15
*-
.-
./ÿ
063
5
:ÿ
ÿ
B<ÿ=Cÿ?
Description
Nm lb-ft lb-in
www.
Specifications
No data
General procedures
Parking Brake Cable Tension Release - VIN
Range: G00442->G45703
Special Service Tools
Electric parking brake release tool
206-082
CAUTION: The warranty of the electric parking brake release tool will be invalidated if the
casing has been removed.
1.
WARNING: Always use the Jaguar Approved Diagnostic System to release the parking brake
cable tension, when carrying out repair operations on the electric park brake which require the
cable tension to be released.
Connect the Jaguar approved diagnostic system to release the parking brake cable tension.
WARNING: The procedure below should only be used in emergency situations, to release
the electric parking brake. All calibration of the parking brake system will be lost, and the parking
brake will need to be re-calibrated to function correctly.
NOTE:
The tool shown must only be used in the event of an emergency.
2. Move the selector lever to the ' P' position.
3. Release the parking brake.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст