Jaguar XJ (X350). Manual — part 1157

22 . NOTE:

Non federal market vehicles only.

Using the special tool, remove the fuel transfer unit locking ring.

23

.

CAUTION: Make sure no damage occurs to the fuel level float.

NOTE:

All vehicles.

Remove the fuel transfer unit.

Press down and rotate the base of the fuel transfer unit counter-

clockwise.

Remove and discard the O-ring seal.

Installation

NOTE:

Federal market vehicles, refer to steps 3 and 13.

NOTE:

Non federal market vehicles, refer to steps 2 and 12.

1 .

CAUTION: Make sure no damage occurs to the fuel level float.

NOTE:

All vehicles.

Install the fuel transfer unit.

Press down and rotate the base of the fuel transfer unit clockwise.

Install a new O-ring seal.

www.

2 . NOTE:

Non federal market vehicles only.

Using the special tool, install the fuel transfer unit locking ring.

Tighten to 60 Nm.

3 . NOTE:

Federal market vehicles only.

Install the fuel transfer unit locking ring.

Tighten to 4 Nm.

4 . NOTE:

All vehicles.

Install the floor aperture cover.

5 . Attach the floor covering.

6 . Install the scuff plate trim panel.

www.