Jaguar XJ (X350). Manual — part 235

9 . Attach the diesel particulate filter pressure pipes to the transmission housing.

Install the retaining bolt.

Tighten to 10 Nm.

10 . Install the right-hand catalytic converter.

For additional information, refer to

Catalytic Converter - 2.7L Diesel (17.50.05)

11 . Connect the pipes to the brake vacuum pump.

12 . Attach the diesel particulate filter pressure pipes.

Install the retaining nut.

Tighten to 10 Nm.

13

.

CAUTION: Make sure the high and low pressure hoses are fully installed and the

retaining clips are positioned in their original position.

Attach the diesel particulate filter differential pressure sensor high-pressure and low-

pressure hoses.

14 . Install the injector sound proofing.

www.

15 . Remove the engine oil filler cap.

16 . Install the engine cover.

17 . Install the oil filler cap.

206-09 : Anti-Lock Control – Stability Assist

Specifications

Specifications

Lubricants, Fluids, Sealers and Adhesives

CAUTION: Do not use brake fluid ITT Super Dot 4 on 2006my vehicles onwards.

Failure to follow this instruction may result in damage to the vehicle.

NOTE:

Brake fluid ITT Super Dot 4 has now been superseded by Shell ESL Super Dot 4 which is
the Jaguar recommended brake fluid. Shell ESL Super Dot 4 can be used on all model
years.

Item

Specification

Brake fluid ITT Super Dot 4

Brake fluid Shell ESL Super Dot 4

Torque Specifications

Description

Nm lb-ft lb-in

Brake master cylinder pressure transducer

30 22 –

Brake line connections to brake pressure control valve block 17 13 –

Yaw rate sensor retaining nuts

7

–

62

Hydraulic control unit (HCU) mounting bolts

9

–

80

Rear wheel speed sensor retaining bolt

9

–

80

www.