Jaguar XJ (X350). Manual — part 455
24 . Remove the special tool from the left-hand cylinder head.
Vehicles without supercharger
25 . Install the left-hand variable camshaft timing oil control unit housing.
Install new O-ring seals.
Tighten to 22 Nm.
26 . Install the right-hand variable camshaft timing oil control unit housing.
Install new O-ring seals.
Tighten to 22 Nm.
All vehicles
27
.
Install the engine front cover.
For additional information, refer to Engine Front Cover - VIN Range: G00442->G45703
(12.65.01)
28 . Remove the special tool.
29 . Install the CKP sensor.
Tighten to 10 Nm.
www.
30 . Connect the CKP sensor electrical connector.
31 . Install the oil strainer.
Install new O-ring seals.
Tighten to 12 Nm.
32 . Install the oil pan.
For additional information, refer to Oil Pan (12.60.44)
Oil Pump - VIN Range: G45704->G99999
(12.60.26)
Special Service Tools
Camshaft setting
303-530
Timing chain tensioning tool
303-532
Crankshaft setting, main tool
303-645
Removal
1 . Remove the oil pan.
For additional information, refer to Oil Pan (12.60.44)
2 . Remove the oil strainer.
Remove and discard the O-ring seal.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст