Jaguar XJ (X350). Manual — part 565
15 . NOTE:
Engine shown removed for clarity.
Remove the special tools.
16 . Install the accessory drive belt pulley and bracket assembly.
Tighten to 80 Nm.
17 . Raise the vehicle.
18 . Remove the special tool.
Install the grommet.
19 . NOTE:
Steering shaft shown removed for clarity.
Install the starter motor.
Tighten to 48 Nm.
20 . Attach the starter motor solenoid harness.
Tighten to 7 Nm.
www.
www.
21 . Attach the starter motor positive cables.
Tighten to 10 Nm.
22 . Install the starter motor retaining bracket.
Tighten to 23 Nm.
23 . Install the generator cooling duct (if equipped).
24 . Install the timing belt cover.
For additional information, refer to Timing Belt Cover
25 . Connect the battery ground cable.
For additional information, refer to Battery Connect (86.15.15)
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст