Jaguar XJ (X350). Manual — part 388
Vehicles with supercharger
87 . NOTE:
Install new O-ring seals to the thermostat housing.
Install thermostat housing.
Tighten to 10 Nm.
88 . Tighten to 10 Nm.
89 . Connect the water pump outlet to thermostat housing hose.
90 . Connect the heater supply hose to the thermostat housing.
91 . Connect the thermostat outlet hose.
92 . Reposition the thermostat housing hose retaining clip.
www.
93 . Connect the ECT sensor electrical connector.
94 . Connect the thermostat housing hoses
Vehicles without supercharger
95 . NOTE:
Install new O-ring seals.
Install the thermostat housing.
Tighten to 10 Nm.
96 . Connect the ECT sensor electrical connector.
All vehicles
97 . Attach the engine wiring harness.
Connect the VCT solenoid electrical connector.
Attach the engine wiring harness.
98 . Attach the engine wiring harness to the cylinder block.
99 . Attach the engine wiring harness to the cylinder block.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст