Jaguar XJ (X350). Manual — part 814
4 . Install the air intake elbow retaining bracket lower retaining bolts.
Tighten to 20 Nm.
5 . Connect the air intake elbow pipes.
6 . Install the EGR valve and the exhaust manifold to EGR valve tube.
Install a new exhaust manifold to EGR valve tube gasket.
Install a new EGR valve to air intake elbow gasket.
Tighten to 10 Nm.
7 . Tighten to 21 Nm.
8 . NOTE:
Remove the sealing caps from the coolant ports.
Connect the coolant hoses.
9 . Connect the exhaust gas recirculation (EGR) valve electrical connector.
www.
10 . Connect the IAT sensor electrical connector.
11 . Connect the charge air cooler coolant pipes.
12 . NOTE:
Install new O-ring seals to the thermostat housing.
Install the thermostat housing.
Tighten to 10 Nm.
13 . Tighten to 10 Nm.
14 . Connect the hose.
15 . Connect the hose.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст