Jaguar XJ (X350). Manual — part 400
26 . Install the crankshaft position sensor.
Tighten to 10 Nm.
27 . Connect the crankshaft position sensor electrical connector.
28 . Install the air deflector.
For additional information, refer to Air Deflector (76.11.41)
29
.
Install the engine front cover.
For additional information, refer to Engine Front Cover - VIN Range: G00442->G45703
(12.65.01)
30 . Carry out the valve clearance check.
For additional information, refer to Valve Clearance Check (12.29.47)
www.
Camshafts RH - VIN Range: G45704-
>G99999 (12.13.18)
Special Service Tools
Camshaft setting/locking tool
303-530
Timing chain tensioning tool
303-532
Crankshaft setting, main tool
303-645
Removal
1
.
Remove the engine front cover.
For additional information, refer to Engine Front Cover - VIN Range: G45704->G99999
(12.65.01)
2 . Raise the vehicle.
3 . Disconnect the crankshaft position (CKP) sensor electrical connector.
4 . Remove the CKP sensor.
5 . Install the special tool.
6 . Lower the vehicle.
7 . Remove the right-hand variable camshaft timing oil control unit housing.
Remove and discard the O-ring seals.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст