Jaguar XJ (X350). Manual — part 608
Water Pump
Removal
1
.
Carry out the supercharging cooling system draining procedure.
For additional information, refer to Supercharger Cooling System Draining, Filling and
Bleeding
2 . Remove the engine oil cooler.
For additional information, refer to Oil Cooler - Vehicles With: Supercharger (12.60.68)
3 . Disconnect the water pump electrical connector.
4 . Disconnect the water pump coolant hoses.
5 . Remove the water pump retaining bolt.
6 . Remove the water pump.
Installation
1 . To install, reverse the removal procedure.
Tighten to 7 Nm.
2
.
Carry out the supercharging cooling system filling and bleeding procedure.
For additional information, refer to Supercharger Cooling System Draining, Filling and
Bleeding
www.
3
.
NOTE:
For NAS vehicles only.
If required, carry out a long drive cycle.
For additional information, refer to Powertrain Control Module (PCM) Long Drive Cycle Self-
Test
303-03C : Engine Cooling – 2.7L Diesel
Specifications
Specifications
Lubricants, Fluids, Sealers and Adhesives
Description
Specification
Jaguar Premium Cooling System Fluid WSS M97B44-D
Jaguar Premium Cooling System Flush EGR-M14P7-A
Capacities
Description
Liters
Cooling system refill 13.5
Torque Specifications
Description
Nm lb-ft lb-in
Coolant expansion tank retaining bolt
7
-
62
Coolant expansion tank bleed screw
3
-
27
Cooling fan motor and shroud retaining bolts 7
-
62
Water pump retaining bolts
10 -
89
Water pump pulley retaining bolts
24 18 -
Charge air cooler to radiator retaining bolts 7
-
62
Air conditioning condenser retaining bolts
7
-
62
Radiator mounting bracket retaining bolts
7
-
62
Charge air cooler intake elbow
7
-
62
Radiator drain plug
2
-
13
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст