Jaguar XJ (X350). Manual — part 1558

Removal and installation

Front Safety Belt Buckle (76.73.49)

Removal

1 . Remove the front seat. For additional information, refer to <<501-10>>.

2 . Disconnect the front safety belt buckle electrical connector.

3
.

NOTE:

The front safety belt buckle retaining bolt is part of the safety belt buckle and
should not be separated.

Remove the front safety belt buckle.

Installation

1
.

CAUTION: Make sure all retaining bolts and retaining nuts are hand

started and hand tightened prior to final tightening. Failure to follow this
instruction may result in component damage.

To install, reverse the removal procedure.

Tighten to 35 Nm.

www.

Front Safety Belt Retractor (76.73.10)

Removal

1 . Remove the B-pillar trim panel. For additional information, refer to <<501-05>>

2 . NOTE:

Left-hand shown, right-hand similar.

Remove the front safety belt access panel.

3 . NOTE:

Left-hand shown, right-hand similar.

Detach the front safety belt.

4 . Detach the front safety belt retractor webbing guide.

5 . Detach the front safety belt upper mounting bracket.

6 . Remove the front safety belt retractor.

Installation

1
.

CAUTION: Make sure all retaining bolts and retaining nuts are hand

started and hand tightened prior to final tightening. Failure to follow this
instruction may result in component damage.

To install, reverse the removal procedure.

Tighten to 35 Nm.

2 . Tighten to 35 Nm.

www.