Jaguar XJ (X350). Manual — part 1360

Removal and installation

Anti-Theft Alarm Horn (86.52.03)

Removal

1 . Remove the wheel and tire assembly. <<204-04>>

2 . Remove the rear fender splash shield retaining screws.

3 . Remove the rear fender splash shield.

4 . Disconnect the electrical connector.

5 . Remove the anti-theft alarm horn.

Installation

1 . To install, reverse the removal procedure.

www.

419-01B : Anti-Theft - Passive

General procedures

Anti-Theft Security Access

1. The complexity of the electronics involved with the passive anti-theft system of which the
security access is a part, and the multiplexed communication network which are connected to
it preclude the use of workshop general electrical test equipment. Therefore, reference should
be made to the Jaguar approved diagnostic system for detailed instructions on security access .
The Jaguar approved diagnostic system systematically tests and analyses all functions and the
various systems affected by it.

Key Programming Using Diagnostic
Equipment

1. The complexity of the electronics involved with the anti-theft, of which the key
programming is a part, and the multiplexed communication network which are connected to it
preclude the use of workshop general electrical test equipment. Therefore, reference should be
made to the Jaguar Approved Diagnostic System for detailed instructions on key
programming . The Jaguar approved diagnostic system systematically tests and analyses all
functions and the various systems affected by it.

www.