Jaguar XJ (X350). Manual — part 226

17 . Remove the parking brake release actuator.

Installation

1 . NOTE:

Make sure the parking brake cable is correctly routed.

Install the parking brake release actuator.

Tighten to 20 Nm .

2 . Attach the parking brake release actuator cable.

1) For right-hand side connector bracket:

Reposition the retaining tang.

Detach the parking brake cable.

4) For left-hand side reaction bracket, detach the parking brake cable.

3 . Reposition the cross brace.

Install new cross brace retaining bolts.

Tighten rear M8 to 35 Nm.

Tighten front M10 to 70 Nm.

4 . Raise special tool and align subframe.

5 . NOTE:

Left-hand shown, right-hand similar.

www.

Install the noise, vibration and harshness brace.

Tighten to 47 Nm

6 . NOTE:

Left-hand shown, right-hand similar.

Install, but do not fully tighten the new rear subframe front retaining bolts.

7 . NOTE:

Left-hand shown, right-hand similar.

Install and fully tighten the new rear subframe retaining bolts.

8 . Tighten rear subframe retaining bolts to 125 Nm.

9 . Remove the special tool supporting the rear subframe.

10 . NOTE:

Right-hand shown, left-hand similar.

Attach the muffler and tailpipe to the hanger insulator.

11 . Attach the fuel tank filler pipe.

www.