Jaguar XJ (X350). Manual — part 490
109 . Remove the special tools.
110 . NOTE:
The crankshaft pulley will be very tight.
Using special tools, remove the crankshaft pulley.
•
Collect the locking ring.
•
Remove and discard the O-ring seal.
111 . Remove the crankshaft position (CKP) sensor.
112
.
CAUTION: Make sure the spark plugs are removed to enable the engine to rotate
freely.
CAUTION: Do not rotate the crankshaft counterclockwise. The timing chains may
bind causing engine damage.
CAUTION: Rotate the crankshaft clockwise to position the engine to top dead
center (TDC) No. 1 cylinder.
Install the special tool 303-645.
113 . Remove the right-hand valve cover.
•
Discard the valve cover gaskets.
www.
114 . Remove the left-hand valve cover.
•
Discard the valve cover gaskets.
115 . Remove the engine front cover.
116 . Remove the right-hand variable camshaft timing oil control unit housing.
•
Remove and discard the O-ring seals.
117 . Remove the left-hand variable camshaft timing oil control unit housing.
•
Remove and discard the O-ring seals.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст