Jaguar XJ (X350). Manual — part 1534

Vehicles with 3.0L engine

6 . NOTE:

Right-hand shown, left-hand similar.

Remove the engine compartment support.

All except vehicles with diesel engine

7 . Remove the outer bulkhead panel insulation.

8 . Remove the outer bulkhead panel.

Remove the securing bolts.

Remove the retaining clip.

9 . Detach the inner bulkhead panel insulation.

10 . Reposition the inner bulkhead panel.

All vehicles

11 . Disconnect the wiper motor electrical connector.

www.

12

.

Remove the brake master cylinder.

For additional information, refer to Brake Master Cylinder - 4.2L NA V8 - AJV8/4.2L SC V8 -

AJV8/3.0L NA V6 - AJ27/3.5L NA V8 - AJV8 (70.30.08)

For additional information, refer to Brake Master Cylinder - 2.7L V6 - TdV6 (70.30.08)

13 . Remove the brake booster.

For additional information, refer to Brake Booster (70.50.17)

14 . Detach the wiper mounting arm and pivot shaft assembly.

15 . Remove the windshield wiper motor.

Installation

All vehicles

1 . To install, reverse the removal procedure.

Tighten to 15 Nm.

2 . Tighten to 17 Nm.

3 . Tighten to 12 Nm.

Tighten in the sequence shown.

www.