Jaguar XJ (X350). Manual — part 471
19 . Install the secondary timing chain tensioner retaining bolts.
Tighten to 12 Nm.
20
.
Install the timing chain tensioning tool 303-532 to the exhaust camshaft sprocket.
Reposition the camshaft sprockets for the most advantageous position for
use of the tool.
21 . Install the primary timing chain guide.
Tighten to 12 Nm.
22
.
CAUTION: Make sure the timing chain slack is on the tensioned side of the timing
chain.
Install the primary timing chain.
Install the primary chain over the crankshaft sprocket and the intake
sprocket.
23 . Install the primary timing chain tensioner guide.
Tighten to 12 Nm.
www.
24
.
CAUTION: During timing chain tensioner compression, do not release the ratchet
stem until the timing chain tensioner piston is fully bottomed in its bore or damage to the
ratchet stem will result.
Using a suitable tool, hold the right-hand timing chain tensioner ratchet lock mechanism
away from the ratchet stem.
25
.
NOTE:
The timing chain tensioner piston should retract with minimal force. If binding occurs,
reposition the timing chain tensioner to eliminate side loading.
Slowly compress the right-hand timing chain tensioner.
26
.
NOTE:
The retaining tool must remain in the timing chain tensioner until the timing chain
tensioner is installed to the engine with the piston bottomed in the bore.
Using a suitable tool, retain the right-hand timing chain tensioner piston.
27 . Install the primary timing chain tensioner assembly.
Tighten to 12 Nm.
28 . Release the tension in the right-hand timing chain tensioner.
Remove the retaining tool.
29
.
CAUTION: While applying the opposing force to sprocket and chain, tighten the
sprocket bolt.
CAUTION: Make sure that a new bolt is installed.
Using the special tool apply force to the tool in an anti-clockwise direction to tension the
primary timing chain on its drive side.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст