Jaguar XJ (X350). Manual — part 507
105 . Attach the engine wiring harness retaining clips.
106 . Attach the right-hand oxygen sensor.
•
Tighten to 10 Nm.
107 . Install the oil filter housing.
•
Install a new O-ring seal.
•
Tighten to 21 Nm.
108 . Connect the oil pressure switch and oil temperature sensor electrical connectors.
109 . Install the oil cooler.
•
Install a new O-ring seal.
•
Tighten to 55 Nm.
110 . NOTE:
Apply a suitable amount of clean engine oil to lubricate the oil filter O-ring seal.
Install a new oil filter.
•
Tighten to 18 Nm.
www.
111 .
112 . Install the intake manifold.
•
Tighten to 22 Nm.
113 . Attach the engine wiring harness.
•
Tighten to 10 Nm.
114 . NOTE:
Left-hand shown, right-hand simular.
Install the lower intake manifold.
•
Tighten to 22 Nm.
115 . Attach the engine wiring harness.
116 . Connect the camshaft position sensor electrical connector.
117 . Connect the fuel temperature sensor electrical connector.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст