Jaguar XJ (X350). Manual — part 616
2) Install the charge air cooler retaining bolts.
Tighten to 7 Nm.
2 . Fit the foam insulation pads.
3 . Install the radiator assembly.
4 . Reposition the radiator forwards.
5 . Raise the vehicle.
For additional information, refer to Lifting
6 . Install the left-hand air conditioning condensor retaining bolt.
1) Install the foam insulation pad.
2) Install the left-hand air conditioning condensor retaining bolt.
Tighten to 7 Nm.
7 . Install the right-hand air conditioning condensor retaining bolt.
1) Install the foam insulation pad.
2) Install the right-hand air conditioning condensor retaining bolt.
3) Tighten to 7 Nm.
www.
8 . Install the radiator lower cowl.
9 . Lower the vehicle.
10 . Remove the tie straps supporting the condensor.
11 . Install the radiator mounting brackets.
Tighten to 7 Nm.
12 . NOTE:
Make sure the retaining clip is fully installed.
Attach the thermostat.
13 . Attach the charge air cooler intake elbow.
Tighten to 7 Nm.
14 . Connect the coolant hose.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст