Jaguar XJ (X350). Manual — part 475
All vehicles
11 . Install the oil level indicator and tube.
Install a new O-ring seal.
Tighten to 6 Nm.
12 . Install the ignition coil-on-plug cover.
13
.
CAUTION: If power steering fluid comes into contact with the paintwork, the
affected area must be immediately washed down with cold water.
Attach the power steering fluid reservoir.
14 . Install the air cleaner. <<303-12B>>
Valve Cover LH - VIN Range: G45704-
>G99999 (12.29.43)
Removal
1 . Remove the air cleaner.
For additional information, refer to Air Cleaner (19.10.05)
2
.
CAUTION: If power steering fluid comes into contact with the paintwork, the
affected area must be immediately washed down with cold water.
Detach the power steering fluid reservoir.
3 . Remove the oil level indicator and tube.
Remove and discard the O-ring seal.
4 . Remove the ignition coil-on-plug cover.
www.
5 . NOTE:
Vehicles with supercharger shown, vehicles without supercharger similar.
Detach the engine cover bracket.
6
.
Detach the engine wiring harness.
1)
Disconnect the variable camshaft timing (VCT) oil control solenoid electrical
connector.
2) Detach the engine wiring harness.
7 . NOTE:
Right-hand shown, left-hand similar.
Detach the engine wiring harness.
8 . Disconnect the fuel line.
For additional information, refer to Spring Lock Couplings
9 . Disconnect the ignition coil-on-plug electrical connectors.
10 . Remove the ignition coil on-plugs.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст